A New Stick-Slip Piezoelectric Actuator Using Dual-Arch Bridge-Type Compliant Mechanisms
Authors:
- 28 June 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 5226-5237
Abstract
This paper reports a new stick-slip piezoelectric linear actuator with large load density, compact size, and high resolution. It is devised using a dual-arch bridge-type driving mechanism (DBDM) and an integrated elliptical preload mechanism(IEPM). The DBDM can generate a coupling motion on the driving point, which provides clamping and releasing actions during stick-slip motion. Also, the DBDM can magnify the clamping force with large amplification ratios, thus improving driving force and load-carrying capacity. The IEPM uses compact flexure hinges to adjust preload force, reducing structural dimension. Then, theoretical analysis and simulations are conducted, and a prototype is fabricated. A modified driving voltage with smooth turning points is designed to improve motion properties further. Experiments show that load density is 0.037 g/mm $^{\mathbf{3}}$ under the driving voltage of 100 V. The actuator has an overall size of 33.6 mm $\times$ 20 mm $\times$ 8 mm and a displacement resolution of 22 nm. Note to Practitioners —Most research on linear actuators focused on motion displacement improvement, and more research needs to be done on improving load-carrying capacity. Therefore, this paper designs a force amplification linear actuator with a compact structure using the DBDM. In the experimental stage, the sudden change of the driving signal affects the output performance, and a modified sawtooth voltage is used to improve the output speed and load-carrying capacity. The experimental results show that under the modified sawtooth wave voltage, the maximum speed of the slider is 1.4 mm/s, and the speed is increased by 17% compared with the traditional wave. When a 200 g load is applied to the slider, the linear actuator operates at a stable speed of 1.2 $\mu $ m/s, 33% faster than conventional sawtooth waves. As a result, the designed actuator has superior performance at higher loads.Keywords
Funding Information
- Natural Science Foundation of Zhejiang Province (LY22E050002)
- National Natural Science Foundation of China (51805276, U23A20618, 52075273)
- National Natural Science Foundation of Ningbo City (2022J133, 2022Z062, 2020Z070)
This publication has 42 references indexed in Scilit:
- A novel F-shaped linear guiding mechanism based compliant positioning stage with restricted parasitic motionPrecision Engineering, 2024
- Design and analysis of a 2-DOF compliant serial micropositioner based on "S-shaped" flexure hingePrecision Engineering, 2023
- Design of a precise positioning stage actuated by a double-layer stick-slip actuator used for precise assemblyMechanism and Machine Theory, 2023
- A Review of Single‐Cell Pose Adjustment and PunctureAdvanced Intelligent Systems, 2022
- Design and Implementation of a Novel Vertical Precision PositionerInternational Journal of Precision Engineering and Manufacturing, 2021
- Design, modeling, and control of a large range 3-DOF micropositioning stageMechanism and Machine Theory, 2021
- A semi-analytical modeling method for the static and dynamic analysis of complex compliant mechanismPrecision Engineering, 2018
- A review of long range piezoelectric motors using frequency leveraged methodSensors and Actuators A: Physical, 2015
- Compliance modeling and analysis of statically indeterminate symmetric flexure structuresPrecision Engineering, 2013
- Precision nano-alignment system using machine vision with motion controlled by piezoelectric motorMechatronics, 2008