A Comparison of the Corrosion Response of Zinc-Rich Coatings with and Without Presence of Carbon Nanotubes Under Erosion and Corrosion Conditions
- 30 July 2018
- journal article
- research article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 74 (11) , 1203-1213
Abstract
Electrochemical impedance spectroscopy tests were conducted on carbon nanotubes (CNTs) enriched zinc-rich epoxy coating and a commercial zinc-rich coating. Coating performances were examined after exposure to a corrosive environment (a CO2 saturated aqueous electrolyte with 2,000 ppm chloride concentration and pH 3.5 to 5.3) at an elevated temperature of 60°C. The coatings’ response after solid particle impingement erosion was also studied. Equivalent circuit models were proposed to elucidate the degradation mechanisms of the zinc-rich coatings under the synergic effect of corrosion and erosion. Results showed that the addition of CNTs into zinc-rich coatings provided better barrier protection for the steel substrate than traditional zinc-rich coatings in the noneroding environment. However, the CNT-filled zinc-rich epoxy coatings did not provide adequate protection when the coated specimens were exposed to an erosive and corrosive environment. CNTs could help with maintaining continuous electrical paths within zinc-rich coatings; however, the conductivity of the coating decreased significantly when zinc particles were partially oxidized. When defects caused by erosion are present in the coatings, CNTs may form galvanic couples with the steel and thus increase the corrosion rate of steel substrate.Keywords
This publication has 19 references indexed in Scilit:
- Corrosion protection mechanisms of carbon nanotube and zinc-rich epoxy primers on carbon steel in simulated concrete pore solutions in the presence of chloride ionsCorrosion Science, 2016
- Effects of multi-walled carbon nano tubes on corrosion protection of zinc rich epoxy resin coatingJournal of Industrial and Engineering Chemistry, 2015
- Galvanic function of zinc-rich coatings facilitated by percolating structure of the carbon nanotubes. Part II: Protection properties and mechanism of the hybrid coatingsProgress in Organic Coatings, 2014
- Electrochemical impedance spectroscopy investigations of epoxy zinc rich coatings: Role of Zn content on corrosion protection mechanismElectrochimica Acta, 2010
- Effect of zinc oxide in combating corrosion in zinc-rich primerProgress in Organic Coatings, 2008
- Electrochemical and anticorrosion performances of zinc-rich and polyaniline powder coatingsElectrochimica Acta, 2008
- Corrosion studies of carbon nanotubes–Zn composite coatingSurface and Coatings Technology, 2007
- Effects of particle sizes and shapes of zinc metal on the properties of anticorrosive coatingsProgress in Organic Coatings, 2003
- Application of EIS and SEM to evaluate the influence of pigment shape and content in ZRP formulations on the corrosion prevention of naval steelCorrosion Science, 2002
- A SEM study on the galvanic protection of zinc-rich paintsJournal of Materials Science, 1990