Fault-Tolerant Neutral-Point-Clamped Converter Solutions Based on Including a Fourth Resonant Leg
- 23 August 2010
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 58 (6) , 2293-2303
Abstract
This paper presents a new three-level topology based on the neutral-point (NP)-clamped converter. An additional leg is added to the basic topology. The main purpose of this leg is to provide the converter with fault-tolerant capabilities. In addition, during normal operation mode, the fourth leg can be used to balance the NP voltage. In this way, the low-frequency voltage oscillations that appear in the NP under some operating conditions are cancelled out effectively. As a result, the modulation strategy of the three main legs of the converter does not have to take care of the voltage balance and can focus on other aspects such as, for instance, minimizing the switching losses of the converter. However, the inclusion of the fourth leg produces some additional losses. A resonant topology is proposed to minimize the switching losses of this leg. Three different fault-tolerant solutions based on the fourth-leg topology are presented. A comparison of these topologies showing their respective advantages and drawbacks is made. Experimental results are presented to show the viability of this approach.Keywords
This publication has 36 references indexed in Scilit:
- Strategies of fault tolerant operation for three-level PWM invertersIEEE Transactions on Power Electronics, 2006
- Operation of a Medium-Voltage Drive Under Faulty ConditionsIEEE Transactions on Industrial Electronics, 2005
- A Multilevel Converter Topology With Fault-Tolerant AbilityIEEE Transactions on Power Electronics, 2005
- Fault Tolerant Three-Phase AC Motor Drive Topologies: A Comparison of Features, Cost, and LimitationsIEEE Transactions on Power Electronics, 2004
- A Unique Fault-Tolerant Design for Flying Capacitor Multilevel InverterIEEE Transactions on Power Electronics, 2004
- Fault-Tolerant Voltage-Fed PWM Inverter AC Motor Drive SystemsIEEE Transactions on Industrial Electronics, 2004
- Fault management of multicell convertersIEEE Transactions on Industrial Electronics, 2002
- Failures-tolerance and remedial strategies of a PWM multicell inverterIEEE Transactions on Power Electronics, 2002
- Experimental fault-tolerant control of a PMSM driveIEEE Transactions on Industrial Electronics, 2000
- A comprehensive study of neutral-point voltage balancing problem in three-level neutral-point-clamped voltage source PWM invertersIEEE Transactions on Power Electronics, 2000