Alkali-activated slag concrete with paper industry waste
Open Access
- 3 February 2021
- journal article
- research article
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 39 (3) , 466-472
Abstract
Pulp and paper manufacturing and recycling industries are a resource-intensive sector, generating 25–40% of the annual municipal solid waste worldwide. Waste includes abundant volumes of paper sludge, as well as the product of its incineration, namely paper sludge ash. These two waste materials are both predominantly landfilled. There is thus a drive for additional valorisation routes for these materials. This short communication focuses on the potential use of paper sludge ash in alkali-activated cement concrete; this type of concrete was estimated to potentially reduce CO2 emissions by up to 5–6 times, while it can also incorporate waste materials or industrial by-products in its composition. The paper presents a laboratory study assessing the feasibility of structural alkali-activated cement concrete with ground granulated blastfurnace slag (a by-product of steel production) and paper sludge ash. Paper sludge ash is used mainly as a source of Ca(OH)2 in the alkaline activator solution, and secondly as an additional source of aluminosilicates. A number of factors potentially affecting the activation process and the resulting concrete quality were investigated, including different dosage of activators, curing conditions and curing time. Mixes with paper sludge ash in the activator system developed high early concrete strengths at ambient temperatures and maintained adequate strengths for structural concrete. Further mix optimisation and mechanical and durability testing, accompanied by material characterisation, are required to establish the advantages of using this waste material in structural alkali-activated cement concrete.Keywords
This publication has 15 references indexed in Scilit:
- Effect of curing temperature on setting time, strength development and microstructure of alkali activated slag cementMaterials Research Innovations, 2014
- Study of Concrete Involving Use of Waste Paper Sludge Ash as Partial Replacement of CementIOSR Journal of Engineering, 2013
- A Study on Paper Industry Waste: Opportunities for Development of Low Cost Concrete in Indian ContextInternational Journal of Scientific Research, 2012
- Effect of water–binder ratio on the mechanical properties of calcium hydroxide-based alkali-activated slag concreteConstruction and Building Materials, 2012
- Paper Mill Sludge Ash as Supplementary Cementitious MaterialJournal of Materials in Civil Engineering, 2011
- An investigation into the strength development of Wastepaper Sludge Ash blended with Ground Granulated Blastfurnace SlagCement and Concrete Research, 2009
- Sodium silicate-based, alkali-activated slag mortarsCement and Concrete Research, 2002
- Effect of elevated temperature curing on properties of alkali-activated slag concreteCement and Concrete Research, 1999
- Factors affecting the strength of alkali-activated slagCement and Concrete Research, 1994
- Alkali activated ground granulated blast-furnace slag concrete: Preliminary investigationCement and Concrete Research, 1991