Effect of contact area variation on squeal propensity of disc modes
Author:
- 17 January 2012
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 226 (10) , 2467-2473
Abstract
The squeal propensity associated with the contact area variation is studied using the finite element method and the analytical contact and rotating modeling. The disc brake system is modeled as a rotating finite element disc in contact with annular sector-friction material. The squeal propensity is numerically determined with respect to the contact span angle and the radial contact length which define the contact geometry. The results show that the squeal propensity is strongly influenced by the contact area variation. Particularly, the squeal propensity of the transverse doublet mode changes periodically with the variation of the contact span angle. However, the in-plane dominant modes have the decreased squeal tendency as the span angle increases. The variation in the radial contact length is also shown to make contribution to the change in squeal propensity for both the transverse and in-plane modes.Keywords
This publication has 11 references indexed in Scilit:
- Statistical analysis of brake squeal noiseJournal of Sound and Vibration, 2011
- Comprehensive stability analysis of disc brake vibrations including gyroscopic, negative friction slope and mode-coupling mechanismsJournal of Sound and Vibration, 2009
- Squeal analysis of gyroscopic disc brake system based on finite element methodInternational Journal of Mechanical Sciences, 2009
- Analytical formulation of mode-coupling instability in disc–pad coupled systemInternational Journal of Mechanical Sciences, 2009
- Dynamic instability of a thin circular plate with friction interface and its application to disc brake squealJournal of Sound and Vibration, 2008
- Brake dynamometer model predicting brake torque variation due to disc thickness variationProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2007
- An Efficient Approach to Estimate Critical Value of Friction Coefficient in Brake Squeal AnalysisJournal of Applied Mechanics, 2006
- Modeling of automotive drum brakes for squeal and parameter sensitivity analysisJournal of Sound and Vibration, 2006
- Brake squeal analysis by finite elementsInternational Journal of Vehicle Design, 2000
- Friction Induced Vibration: Brake MoanSAE International Journal of Advances and Current Practices in Mobility, 1995