Issues to Be Solved for Energy Simulation of An Existing Office Building
Open Access
- 7 April 2016
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 8 (4) , 345
Abstract
With the increasing focus on low energy buildings and the need to develop sustainable built environments, Building Energy Performance Simulation (BEPS) tools have been widely used. However, many issues remain when applying BEPS tools to existing buildings. This paper presents the issues that need to be solved for the application of BEPS tools to an existing office building. The selected building is an office building with 33 stories above ground, six underground levels, and a total floor area of 91,898 m2. The issues to be discussed in this paper are as follows: (1) grey data not ready for simulation; (2) subjective assumptions and judgments on energy modeling; (3) stochastic characteristics of building performance and occupants behavior; (4) verification of model fidelity-comparison of aggregated energy; (5) verification of model fidelity-calibration by trial and error; and (6) use of simulation model for real-time energy management. This study investigates the aforementioned issues and explains the factors that should be considered to address these issues when developing a dynamic simulation model for existing buildings.Keywords
Funding Information
- Energy Efficiency & Resources Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) (20152020105550)
This publication has 12 references indexed in Scilit:
- The gap between predicted and measured energy performance of buildings: A framework for investigationAutomation in Construction, 2014
- Predicted vs. actual energy performance of non-domestic buildings: Using post-occupancy evaluation data to reduce the performance gapApplied Energy, 2012
- Developing an analytical model for planning systems verification, validation and testing processesAdvanced Engineering Informatics, 2012
- Difficulties and limitations in performance simulation of a double skin façade with EnergyPlusEnergy and Buildings, 2011
- Predicting building performance: the ethics of computer simulationBuilding Research & Information, 2010
- History and development of validation with the ESP-r simulation programBuilding and Environment, 2008
- Simulation and experimental validation of the variable-refrigerant-volume (VRV) air-conditioning system in EnergyPlusEnergy and Buildings, 2008
- Calibrating Detailed Building Energy Simulation Programs with Measured Data—Part II: Application to Three Case Study Office Buildings (RP-1051)HVAC&R Research, 2007
- Calibrating Detailed Building Energy Simulation Programs with Measured Data—Part I: General Methodology (RP-1051)HVAC&R Research, 2007
- Series of experiments for empirical validation of solar gain modeling in building energy simulation codes—Experimental setup, test cell characterization, specifications and uncertainty analysisBuilding and Environment, 2006