Reaction of Br2 with Adsorbed CO on Pt, Studied by the Surface Interrogation Mode of Scanning Electrochemical Microscopy

Authors:

Abstract
Scanning electrochemical microscopy surface interrogation (SI-SECM) in the cyclic voltammetry mode was successfully used to detect and quantify adsorbed CO on a Pt electrode by reaction with electrogenerated Br2. The two-electrode setup used in this new technique allowed the production of Br2 on an interrogator tip, which reported a transient positive feedback above a Pt substrate at open circuit as an indication of the reactivity of this halogen with CO(ads). Br− and CO2 are shown to be the main products of the reaction (in the absence of O2), which may involve the formation of bromophosgene as a hydrolyzable intermediate. Under saturation conditions, CO(ads) was reproducibly quantified at the polycrystalline Pt surface with θCO ≈ 0.5. The reaction is shown to be blocked by the action of pre-adsorbed cyanide, which demonstrates the surface character of the process. The formation of CO2 as an end product was further tested in a bulk experiment: addition of Pt black to a mixture of Br2 in 0.5 M H2SO4 through which CO was bubbled gave a precipitate of BaCO3 in a saturated solution of Ba(OH)2. The use of SI-SECM allowed access to a reaction that would otherwise be difficult to prove through conventional electrochemistry on a single electrode.

This publication has 27 references indexed in Scilit: