Modeling and Experimental Verification of Time-Controlled Grinding Removal Function for Optical Components
Open Access
- 6 July 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (7) , 1384
Abstract
As a flexible grinding method with high efficiency, abrasive belt grinding has been widely used in the machining of mechanical parts. However, abrasive belt grinding has not been well applied in the field of ultra-precision optical processing, due to the lack of a stable and controllable removal function. In this paper, based on the idea of deterministic machining, the time-controlled grinding (TCG) method based on the abrasive belt as a machining tool was applied to the deterministic machining of optical components. Firstly, based on the Preston equation, a theoretical model of the TCG removal function was established. Secondly, removal function experiments were carried out to verify the validity and robustness of the theoretical removal model. Further, theoretical and actual shaping experiments were carried out on 200 mm × 200 mm flat glass-ceramic. The results show that the surface shape error converged from 6.497 μm PV and 1.318 μm RMS to 5.397 μm PV and 1.115 μm RMS. The theoretical and experimental results are consistent. In addition, the surface roughness improved from 271 to 143 nm Ra. The results validate the concept that the removal function model established in this paper can guide the actual shaping experiments of TCG, which is expected to be applied to the deterministic machining of large-diameter optical components.Keywords
Funding Information
- National Key Research and Development Program of China (2019YF0708903, 52205505, DMETKF2022006)
- National Natural Science Foundation of China (2019YF0708903, 52205505, DMETKF2022006)
- Foundation of State Key Laboratory of Digital Manufacturing Equipment and Technology (2019YF0708903, 52205505, DMETKF2022006)
This publication has 26 references indexed in Scilit:
- An improved robotic abrasive belt grinding force model considering the effects of cut-in and cut-offJournal of Manufacturing Processes, 2019
- A theoretical and experimental investigation on ultrasonic assisted grinding from the single-grain aspectInternational Journal of Mechanical Sciences, 2018
- Mechanism of compound fracture and removal in grinding process for low-expansion glass ceramicsThe International Journal of Advanced Manufacturing Technology, 2017
- Prediction of depth of cut for robotic belt grindingThe International Journal of Advanced Manufacturing Technology, 2016
- Study on wear of diamond wheel in ultrasonic vibration-assisted grinding ceramicWear, 2015
- A simulation platform for optimal selection of robotic belt grinding system parametersThe International Journal of Advanced Manufacturing Technology, 2012
- A method for grinding removal control of a robot belt grinding systemJournal of Intelligent Manufacturing, 2011
- Grinding metre scale mirror segments for the E-ELT ground based telescopeCIRP Annals, 2011
- Optimization of computer controlled polishingApplied Optics, 1977
- The abrasion of metals: A model of the processWear, 1962