In situ investigation of intermetallic compound formation during the solid Fe-liquid Al reaction by X-ray diffraction and tomography
Authors:
- Benjamin LeflonBLBenjamin Leflon
- Thibaut ChaiseTCThibaut Chaise
- C. Le BourlotCBC. Le Bourlot
- Nicolas MaryNicolas Mary
- Rafael VargasRVRafael Vargas
- W. LudwigWLW. Ludwig
- Shun TokitaSTShun Tokita
- Kiyoaki T. SuzukiKSKiyoaki T. Suzuki
- Yutaka S. SatoYSYutaka S. Sato
- Sylvain DancetteSDSylvain Dancette
Preprint
- 7 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
This study investigates the formation sequence and growth kineticsof intermetallic compounds (IMCs) during the reaction between liquidaluminum (Al) and solid iron (Fe), using for the first time both in situsynchrotron X-ray diffraction and tomography with samples designed totailor the morphology of the reaction interface.Experimental samples comprised commercially pure mixtures of Al and Fe powders, as well asAl powders deposited onto Fe rods, annealed at temperatures ranging from400 °C to 900 °C. Two primary IMC phases—Fe2 Al5 and Fe4 Al13 —weresystematically observed during annealing, appearing simultaneously as soonas Al melted, with Fe2 Al5 as the dominant phase, exhibiting its characteristictongue-like morphology. A temperature ramp applied to the powder mixturefurther revealed the subsequent formation of FeAl, followed by FeAl2 . Themultisite and multidirectional reaction front of the powder mixture samplelead to very fast growth of the IMCs, consuming most of the reactants withina few tens of seconds. Conversely for the Al/Fe rod configuration (featuringa single reaction interface), the steady increase in IMC layer thickness wasmonitored in situ and confirmed to follow a volume-diffusion-controlledgrowth regime at 700 °C, with derived diffusion parameters: pre-exponentialfactor k0 = 8.43 · 10-2 m2 s-1 and activation energy Q = 187 kJ mol-1 .However, at 770 °C and 830 °C, the kinetics deviated from this regime afteran initial time delay, due to liquid Al dissolving the IMC layer. Beyondreducing layer thickness, this dissolution also induced Fe4 Al13 precipitationwithin the Al matrix upon cooling. Tracking the displacement of the Fe/IMCand Al/IMC interfaces additionally demonstrated that Fe repels the IMCtoward liquid Al, a mechanism proposed to minimize transformation-inducedstress, scaling with the molar volume mismatch between Fe and Fe2 Al5 .Keywords
This publication has 39 references indexed in Scilit:
- Simulation of the intermetallic compound layer formation in aluminum-steel arc weldingThe International Journal of Advanced Manufacturing Technology, 2026
- Interaction Between the Growth and Dissolution of Intermetallic Compounds in the Interfacial Reaction Between Solid Iron and Liquid AluminumMetallurgical and Materials Transactions A, 2016
- Time-Resolved X-Ray Microtomography Observation of Intermetallic Formation Between Solid Fe and Liquid AlMetallurgical and Materials Transactions A, 2013
- Study of microstructure and phase evolution of hot-dipped aluminide mild steel during high-temperature diffusion using electron backscatter diffractionApplied Surface Science, 2011
- On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloysActa Materialia, 2011
- Kinetics of reactions in FeAl synthesis studied by the DTA technique and JMA modelIntermetallics, 2010
- Kinetics of isothermal reactive diffusion between solid Fe and liquid AlJournal of Materials Science, 2010
- Porous FeAl intermetallics fabricated by elemental powder reactive synthesisIntermetallics, 2009
- On the influence of silicon on the growth of the alloy layer during hot dip aluminizingJournal of Materials Science, 1986
- The effect of dissolution on the growth of the Fe2Al5 interlayer in the solid iron -liquid aluminium systemJournal of Materials Science, 1981