Maximum Reachable Torque, Power and Speed for Five-Phase SPM Machine With Low Armature Reaction
Open Access
- 24 March 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 31 (3) , 959-969
Abstract
In this paper, the study of the torque and power versus speed characteristics for a family of five-phase surface-mounted permanent magnet machine is carried out. With considering hypotheses [linear magnetic modeling, only first and third harmonic terms in the back electromotive force (EMF) and current spectrums], an optimization problem that aims to maximize the torque for given maximum peak voltage and root mean square (RMS) current is formulated: the optimal torque sharing among the two virtual machines (the two dq-axis subspaces) that represent the real five-phase machine is thus calculated for any mechanical speed. For an inverter and a dc voltage sized with only considering the first harmonic of back EMF and current, the problem is solved with changing the virtual machine back EMFs and inductances ratios. With the introduction of the maximum torque/speed point, maximum power/speed point, and maximum reachable speed, it can be shown that, if the inductance ratio is large enough for given Volt-Ampere rating, the machine can produce higher torque without reducing its speed range, thus meaning that the capability of the inverter to work is improved with the use of the third harmonic. This property is all the truer as the base armature reaction is large. A particular five-phase machine is sized and numerically analyzed to check this property.Keywords
This publication has 23 references indexed in Scilit:
- Inductances and Back-emf Harmonics Influence on the Torque/Speed Characteristic of Five-Phase SPM Machine2014
- Torque Improvement of Five-Phase Surface-Mounted Permanent Magnet Machine Using Third-Order HarmonicIEEE Transactions on Energy Conversion, 2014
- High-speed functionality optimization of five-phase PM machine using third harmonic currentCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2014
- Magnet Shape Optimization to Reduce Pulsating Torque for a Five-Phase Permanent-Magnet Low-Speed MachineIEEE Transactions on Magnetics, 2013
- Research on field-weakening control of multiphase permanent magnet synchronous motor2011
- A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real TimeIEEE Transactions on Industrial Electronics, 2011
- Control of a high torque density seven-phase induction motor with field-weakening capability2010
- General Modulation Strategy for Seven-Phase Inverters With Independent Control of Multiple Voltage Space VectorsIEEE Transactions on Industrial Electronics, 2008
- Analytical Determination of DC-Bus Utilization Limits in Multiphase VSI Supplied AC DrivesIEEE Transactions on Energy Conversion, 2008
- Field Weakening Operation of High Torque Density Five-Phase Permanent Magnet Motor Drives2005