Microstructural Development and Surface Characterization of Electrodeposited Nickel/Yttria Composite Coatings
Authors:
- 1 January 2003
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 150 (5) , C356-C361
Abstract
The addition of yttria particles to a Watts nickel plating bath is shown to significantly change the surface morphology and preferred crystallographic orientation of the composite coatings deposited on Inconel 625 substrates. The typical morphology for nickel deposits from an additive-free Watts bath is pyramidal, however the addition of yttria particles in concentrations >2 g dm−3>2 g dm−3 changes this morphology to hemispherical. The preferred growth direction was also influenced by yttria with a change from a 〈100〉 to a 〈111〉 preferred growth direction occurring when the particle loading exceeded 2 g dm−3.2 g dm−3. The results here show that both the nucleation and growth process of the nickel matrix was greatly influenced by the yttria additions. When yttria was absent from the electroplating bath the growth took place preferentially on (200) orientated planes. However, yttria acts to inhibit growth on grains of this orientation, leading to a requirement for additional nucleation, which takes place preferentially on (111) planes. This constant inhibition of growth and renucleation causes the changes to a hemispherical morphology observed. © 2003 The Electrochemical Society. All rights reserved.Keywords
This publication has 22 references indexed in Scilit:
- The Electrodeposition of Composite Coatings based on Metal Matrix-Included Particle DepositsTransactions of the IMF, 2000
- Electrolytic and electroless coatings of Ni–PTFE compositesSurface and Coatings Technology, 1998
- Oxidation Behavior of a Ni ‐ La2 O 3 Codeposited Film on NickelJournal of the Electrochemical Society, 1998
- Electrodeposition of Composite Layers Consisting of Inert Inclusions in a Metal MatrixTransactions of the IMF, 1997
- Electrochemical codeposition of inert particles in a metallic matrixJournal of Applied Electrochemistry, 1995
- Codeposition of SiC powders with nickel in a Watts bathJournal of Applied Electrochemistry, 1994
- The development of composite plating for advanced materialsJOM, 1990
- Factors Affecting the Entrapment of Alumina Particles During the Electrodeposition of CopperTransactions of the IMF, 1981
- The Effect of Current Density and Agitation on the Formation of Electrodeposited Composite CoatingsTransactions of the IMF, 1976
- Kinetics of the Deposition of Inert Particles from Electrolytic BathsJournal of the Electrochemical Society, 1972