Fast pyrolysis bio‐oil as precursor of thermosetting epoxy resins
Authors:
- 14 November 2017
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 58 (8) , 1296-1307
Abstract
Fast pyrolysis bio‐oil was employed as a source of phenolic compounds in the production of a bio‐based polymeric network. The bio‐oil was reacted with epichlorohydrin in alkaline medium using benzyltriethylammonium chloride as a phase transfer catalyst. The amount of free phenolic hydroxyl groups before and after modification was quantified through 31 P‐NMR spectroscopy; and the epoxy content of the bio‐oil upon the chemical functionalization was measured by means of a titration using HBr in acetic acid solution. Grafting of epoxy functions onto the monomer`s structure was studied by FTIR. Likewise, α‐resorcylic acid was also modified with reactive epoxy moieties, and used as low molecular weight comonomer. The epoxidized derivatives of the bio‐oil were cured in epoxy polymers with 4‐dimethylaminopyridine. Thermo‐mechanical characterization showed that the obtained materials behave as thermoset amorphous polymers, exhibiting modulus values ranging from approximately 1.5–3.4 GPa at room temperature and glass transition temperatures above 100°C. POLYM. ENG. SCI., 58:1296–1307, 2018. © 2017 Society of Plastics EngineersKeywords
Funding Information
- NSF (NSF EPS‐115882)
- U.S. Department of Agriculture (2015‐67021‐22842)
This publication has 31 references indexed in Scilit:
- Application of quantitative 31P NMR in biomass lignin and biofuel precursors characterizationEnergy & Environmental Science, 2011
- Physiochemical properties of bio-oil produced at various temperatures from pine wood using an auger reactorBioresource Technology, 2010
- The pyrolytic degradation of wood-derived lignin from pulping processBioresource Technology, 2010
- Main routes for the thermo-conversion of biomass into fuels and chemicals. Part 1: Pyrolysis systemsEnergy Conversion and Management, 2009
- Production of renewable phenolic resins by thermochemical conversion of biomass: A reviewRenewable and Sustainable Energy Reviews, 2008
- Lignins as Components of Macromolecular Materials2008
- Synthesis and thermal characterization of phosphorus containing siliconized epoxy resinsEuropean Polymer Journal, 2006
- Pyrolysis of Wood/Biomass for Bio-oil: A Critical ReviewEnergy & Fuels, 2006
- Pyrolysis–gas chromatography/mass spectrometry of Quercus sp. woodJournal of Analytical and Applied Pyrolysis, 2006
- Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibresComposites Science and Technology, 2001