Dislocation Density and Texture in Copper Deformed by Cold Rolling and Ecap
Open Access
- 23 October 2017
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 21 (1)
Abstract
Analysis of dislocation density in metallic materials has been pursued with great interest for many years because dislocations are closely associated with plastic deformation and thus exert a deep effect on the mechanical properties of any material. Crystallographic texture has also a decisive influence in some properties. In this work, the dislocation density was estimated from the line broadening of X-ray diffractograms using the Convolutional Multiple Whole Profile Program (CMWP) and crystallographic texture analyses were performed using inverse pole figures (IPF). The material used in this research was pure copper deformed by cold rolling and Equal Channel Angular Pressing (ECAP). The dislocation density values obtained by Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) were compared and discussed. While, in the case of cold rolling, the crystallographic texture of the material was enhanced with increasing deformation, it was reduced with increasing deformation in the case of ECAP processing.Keywords
This publication has 23 references indexed in Scilit:
- Assessment of Strain Energy by Measuring Dislocation Density in Copper and Aluminium Prepared by ECAP and ARBMATERIALS TRANSACTIONS, 2008
- Computer programANIZCfor the calculation of diffraction contrast factors of dislocations in elastically anisotropic cubic, hexagonal and trigonal crystalsJournal of Applied Crystallography, 2003
- Substructure development in cold rolled copper single crystalsMaterials Science and Engineering: A, 2002
- The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practiceJournal of Applied Crystallography, 1999
- High angle boundaries formed by grain subdivision mechanismsActa Materialia, 1997
- Principle of equal-channel angular pressing for the processing of ultra-fine grained materialsScripta Materialia, 1996
- Powder diffractionReports on Progress in Physics, 1996
- The development of deformation substructures in face-centred cubic metalsMaterials Science and Engineering: A, 1989
- The determination of dislocation densities in thin filmsPhilosophical Magazine, 1961
- The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silverPhilosophical Magazine, 1960