Beam Squinting Compensation: An NCR-Assisted Scenario
- 19 March 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (8) , 12376-12390
Abstract
Millimeter wave (mmWave) and sub-THz communications, foreseen for sixth generation (6G), suffer from high propagation losses which affect the network coverage. Another challenge raised by the adoption of high frequency bands is the use of large bandwidths. In order to deal with this last challenge, a common configuration is to divide a large frequency band into multiple smaller subbands. In this context, we consider a mobile network where signaling related to measurements used for radio resource management is transmitted in one subband centered at frequency $f_{c}$ and data transmission is performed at a different frequency $f_{c} + \Delta f$ based on the measurements taken at $f_{c}$. Here, a challenge is that the array radiation pattern can be frequency dependent and, therefore, lead to beam misalignment, called beam squinting. Thus, in this work, we characterize beam squinting in the context of subband operation and propose a solution where the beam patterns to be employed at a given subband can be adjusted/compensated to mitigate beam squinting. For performance evaluation, we present a case study where our compensation method is employed in a network-controlled repeaters (NCRs)-assisted scenario. NCR, which have been standardized in third generation partnership project Release 18, are considered as cost-efficient solutions for coverage extension in the context of mmWave. Specifically, NCRs are radio frequency repeaters with beamforming capability controlled by the network through side control information. Our results show that, without compensation, the perceived signal to interference-plus-noise ratio (SINR) and so the throughput can be substantially decreased due to beam squinting. However, with our proposed compensation method, the system is able to support NCR subband signaling operation with similar performance as if signaling and data were transmitted at the same frequency.Keywords
All Related Versions
This publication has 25 references indexed in Scilit:
- Impact of Network Deployment on the Performance of NCR-assisted Networks2024
- An Investigation on the Effects of Beam Squint Caused by an Analog Beamformed User Terminal Utilizing Antenna ArraysIEEE Access, 2023
- Beam Squint Analysis and Mitigation via Hybrid Beamforming Design in THz Communications2023
- Wideband Beamforming for Hybrid Massive MIMO Terahertz CommunicationsIEEE Journal on Selected Areas in Communications, 2021
- THzPrism: Frequency-Based Beam Spreading for Terahertz Communication SystemsIEEE Wireless Communications Letters, 2020
- Delay-Phase Precoding for THz Massive MIMO with Beam Split2019
- A Stochastic Channel Model With Dual Mobility for 5G Massive NetworksIEEE Access, 2019
- 5G Measurement Adaptation Based on Channel Hardening OccurrenceIEEE Communications Letters, 2019
- Effect of Wideband Beam Squint on Codebook Design in Phased-Array Wireless Systems2017
- Optimum Array Processing2002