Investigation on the mechanism of H2S removal by biological activated carbon in a horizontal biotrickling filter
Authors:
- 15 November 2005
- journal article
- research article
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 69 (3) , 350-357
Abstract
The use of supporting media for the immobilization of microorganisms is widely known to provide a surface for microbial growth and a shelter that protects the microorganisms from inhibitory compounds. In our previous studies, activated carbon (AC) alone used as a support medium for H2S biological removal was proved prompt and efficient in a bench-scale biofilter and biotrickling filter. In this study, the mechanisms of H2S elimination using microbial immobilized activated carbon, i.e., biological activated carbon (BAC), are investigated. A series of BAC as supporting medium were taken from the inlet to outlet of a bench-scale horizontal biotrickling filter to examine the different effects of physical/chemical adsorption and microbial degradation on the overall removal of H2S. The surface properties of BAC together with virgin and exhausted carbon (after H2S breakthrough test, non-microbial immobilization) were characterized using the sorption of nitrogen (Braunner–Emmett–Teller test), scanning electron microscopy (SEM), surface pH, thermal, carbon–hydrogen–nitrogen–sulfur (CHNS) elemental and Fourier transform infrared (FTIR) analyses. Tests of porosity and surface area provide detailed information about the pore structure of BAC along the bed facilitating the understanding of potential pore blockages due to biofilm coating. A correlation between the available surface area and pore volume with the extent of microbial immobilization and H2S uptake is evidenced. SEM photographs show the direct carbon structure and biofilm coated on carbon surface. FTIR spectra, differential thermogravimetric curves and CHNS results indicate less diversity of H2S oxidation products on BAC than those previously observed on exhausted carbon from H2S adsorption only. The predominant oxidation product on BAC is sulfuric acid, and biofilm is believed to enhance the oxidation of H2S on carbon surface. The combination of biodegradation and physical adsorption of using BAC in removal of H2S could lead to a long-term (i.e., years) good performance of biotrickling filters and biofilters based on BAC compared to carbon adsorption only.Keywords
This publication has 17 references indexed in Scilit:
- Treatment of H2S using a horizontal biotrickling filter based on biological activated carbon: reactor setup and performance evaluationApplied Microbiology and Biotechnology, 2004
- Long-Term Operation of a Biofilter for Simultaneous Removal of H2S and NH3Journal of the Air & Waste Management Association, 2002
- H2S Adsorption/Oxidation on Materials Obtained Using Sulfuric Acid Activation of Sewage Sludge-Derived FertilizerJournal of Colloid and Interface Science, 2002
- On the Adsorption/Oxidation of Hydrogen Sulfide on Activated Carbons at Ambient TemperaturesJournal of Colloid and Interface Science, 2002
- Analysis of the Relationship between H2S Removal Capacity and Surface Properties of Unimpregnated Activated CarbonsEnvironmental Science & Technology, 2000
- Biological deodorization of hydrogen sulfide using porous lava as a carrier of Thiobacillus thiooxidansJournal of Bioscience and Bioengineering, 2000
- Effect of Surface Characteristics of Wood-Based Activated Carbons on Adsorption of Hydrogen SulfideJournal of Colloid and Interface Science, 1999
- Biofiltration of BTEX contaminated air streams using compost-activated carbon filter mediaJournal of Hazardous Materials, 1998
- Activated carbon and synthetic resins as support material for methanogenic phenol-degrading consortia-Comparison of phenol-degrading activitiesWater Environment Research, 1995
- Biofiltration Control of Hydrogen Sulfide 1. Design and Operational ParametersAir & Waste, 1994