Effect of Thermal Extraction on Coal-Based Activated Carbon for Methane Decomposition to Hydrogen
Authors:
Open Access
- 29 January 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (5) , 2465-2472
Abstract
After coal is treated by thermal solution of solvent, a certain amount of thermal solution oil and residue can be obtained, and the macromolecular network structure in coal can also be relaxed. These will inevitably affect the emission of harmful gases and distribution of the pore structure when the residue is made into activated carbon (AC). In this paper, the effects of thermal solution pretreatment on the microcrystalline structure, surface properties, pore structure of resultant ACs at different temperatures, and their catalytic performances in methane decomposition to hydrogen were investigated. The results show that the surface oxygen-containing functional groups of the residue-based ACs are changed, and the specific area of ACs increases from 1730 to 2652 m2/g with the increase in activated temperature. The pore diameter distribution of ACs also is changed. In the process of methane decomposition to hydrogen, the residue-based ACs show higher catalytic activity than coal-based ACs. AC-1123-1 and AC-1123 show the best stability, while AC-823-1 has the highest initial activity. With the increase in activated temperature, residue-based ACs show higher activity and stability, and partial fibrous carbon is deposited on the surface of ACs after the reaction. It is thought that increased mesoporosity is beneficial to the catalytic activity and stability of AC in methane decomposition to hydrogen, and the reduction of surface oxygen-containing functional groups contribute to the formation of fibrous carbon on the surface of AC after the reaction.Keywords
Funding Information
- Natural Science Foundation of Shanxi Province (201801D121038)
- Shanxi university Science and technology innovation Project (2017164, 201802094)
- Datong basic research project (2017128, 2017132)
This publication has 39 references indexed in Scilit:
- Catalytic molten metals for the direct conversion of methane to hydrogen and separable carbonScience, 2017
- Review and evaluation of hydrogen production methods for better sustainabilityInternational Journal of Hydrogen Energy, 2015
- Methane decomposition over Ni, Co and Fe based monometallic catalysts supported on sol gel derived SiO2 microflakesChemical Engineering Journal, 2015
- Impact of group VI metals addition to Co/MgO catalyst for non-oxidative decomposition of methane into COx-free hydrogen and carbon nanotubesFuel, 2014
- Synthesis and characterization of Ni/Ce–SiO2 and Co/Ce–TiO2 catalysts for methane decompositionFuel, 2013
- Production of Hydrogen and Nanocarbon from Catalytic Decomposition of Methane over a Ni–Fe/Al2O3 CatalystEnergy & Fuels, 2013
- Hydrogen production by catalytic decomposition of methane using a Fe-based catalyst in a fluidized bed reactorJournal of Natural Gas Chemistry, 2012
- Cobalt based catalysts prepared by Pechini method for CO2-free hydrogen production by methane decompositionInternational Journal of Hydrogen Energy, 2010
- Methane decomposition over Co thin layer supported catalysts to produce hydrogen for fuel cellInternational Journal of Hydrogen Energy, 2010
- Ni/SiO2 and Fe/SiO2 catalysts for production of hydrogen and filamentous carbon via methane decompositionCatalysis Today, 2002