TOOL CONDITION MONITORING USING ACOUSTIC EMISSION, SURFACE ROUGHNESS AND GROWING CELL STRUCTURES NEURAL NETWORK
Authors:
- 4 December 2012
- journal article
- research article
- Published by Taylor & Francis in Machining Science and Technology
- Vol. 16 (4) , 653-676
Abstract
The monitoring of tool wear is a most difficult task in the case of various metal-cutting processes. Artificial Neural Networks (ANN) has been used to estimate or classify certain wear parameters, using continuous acquisition of signals from multi-sensor systems. Most of the research has been concentrated on the use of supervised neural network types like multi-layer perceptron (MLP), using back-propagation algorithm and Radial Basis Function (RBF) network. In this article, a new constructive learning algorithm proposed by Fritzke, namely Growing Cell Structures (GCS) has been used for tool wear estimation in face milling operations, thereby monitoring the condition of the tool. GCS generates compact network architecture in less training time and performs well on new untrained data. The performance of this network has been compared with that of another constructive learning algorithm-based neural network, namely the Resource Allocation Network (RAN). For the sake of establishing the effectiveness of GCS, results obtained have been compared with those obtained using Multi Layer Perceptron (MLP), which is a standard and widely used neural network.Keywords
This publication has 26 references indexed in Scilit:
- Drilling wear detection and classification using vibration signals and artificial neural networkInternational Journal of Machine Tools and Manufacture, 2003
- Sensor signals for tool-wear monitoring in metal cutting operations—a review of methodsInternational Journal of Machine Tools and Manufacture, 2000
- Discovering relevance knowledge in data: a growing cell structures approachIEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 2000
- On-line metal cutting tool condition monitoring.International Journal of Machine Tools and Manufacture, 2000
- The state of machining process monitoring research in KoreaInternational Journal of Machine Tools and Manufacture, 1999
- Neural network solutions to the tool condition monitoring problem in metal cutting—A critical review of methodsInternational Journal of Machine Tools and Manufacture, 1997
- An introduction to multisensor data fusionProceedings of the IEEE, 1997
- Robust Tool Wear Estimation With Radial Basis Function Neural NetworksJournal of Dynamic Systems, Measurement, and Control, 1995
- Growing cell structures—A self-organizing network for unsupervised and supervised learningNeural Networks, 1994
- Acoustic Emission Sensing of Tool Wear in Face MillingJournal of Engineering for Industry, 1987