Enhancing Ammonia Reactivity and Accelerating Autoignition via Off-Site Nanosecond Pulsed Discharge: Strategy and Mechanism
Authors:
- Ruizhi CaoRCRuizhi Cao
- Yanxiao WuYWYanxiao Wu
- Xuejiao LiXLXuejiao Li
- Liang YuLYLiang Yu
- Xingcai LuXLXingcai Lu
Preprint
- 24 July 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Ammonia’s low reactivity and long ignition delay time (IDT) remain major barriers to its direct use in compression-ignition (CI) engines. This study proposes an off-site nanosecond pulsed discharge (NPD) pretreatment strategy to enhance ammonia autoignition through plasma-induced reforming. A multiscale numerical framework was developed by coupling the plasma discharge, post-discharge relaxation, and subsequent constant-volume CI autoignition stages. The effects of pretreatment pressure, mixture composition, reduced electric field (E/N), temperature, and energy fraction (EF) on the post-discharge composition and IDT were systematically investigated. Reaction-path and species-removal analyses identify H2 as the dominant long-lived product responsible for ignition enhancement, whereas the combined contributions of NO, HNO, H2O2, and N2H4 are comparatively limited. Under isothermal pretreatment, decreasing pressure and increasing the initial NH3 fraction favor H2 formation. For pure NH3 at an EF of 5%, the normalized H2 production reaches approximately 3.4% relative to the initial NH3 amount, reducing the IDT at 1000 K and 20 bar to approximately 13.9% of the untreated value (IDT0/IDT=7.2). Chemical-enthalpy analysis further reveals distinct energy-redistribution characteristics: NH3/air discharge exhibits a negative chemical enthalpy change because of plasma-induced oxidation, whereas pure-NH3 discharge produces a positive chemical enthalpy change, indicating that part of the deposited electrical energy is retained in the reformate as H2. Under adiabatic pretreatment, discharge-stage heating enhances neutral-radical pathways and increases the maximum IDT0/IDT to approximately 22. These results clarify the coupled electrical, thermal, and chemical mechanisms of off-site plasma reforming and support its potential for improving ammonia autoignition.Keywords
This publication has 29 references indexed in Scilit:
- Research on the state-of-the-art of efficient and ultra-clean ammonia combustion: From combustion kinetics to engine applicationsApplied Energy, 2025
- Plasma-assisted NH3 cracking in warm plasma reactors for green H2 productionChemical Engineering Journal, 2024
- Low- and intermediate-temperature ammonia/hydrogen oxidation in a flow reactor: Experiments and a wide-range kinetic modelingChemical Engineering Journal, 2023
- High pressure oxidation of NH/-heptane mixturesCombustion and Flame, 2023
- On nanosecond plasma-assisted ammonia combustion: Effects of pulse and mixture propertiesCombustion and Flame, 2022
- Plasma assisted ammonia combustion: Simultaneous NOx reduction and flame enhancementCombustion and Flame, 2021
- Experimental and numerical study of the laminar burning velocity of CH4–NH3–air premixed flamesCombustion and Flame, 2018
- Kinetic studies of ozone assisted low temperature oxidation of dimethyl ether in a flow reactor using molecular-beam mass spectrometryCombustion and Flame, 2016
- Enhancement of flame development by microwave-assisted spark ignition in constant volume combustion chamberCombustion and Flame, 2013
- Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanismCombustion and Flame, 2009