The Importance of Pore Type on Permeability of Neogene Carbonates, Great Bahama Bank

Authors:

Abstract
Permeability was measured on cores from two wells (Clino and Unda) from the western margin of Great Bahama Bank. Permeability varies from < 1 md to > 8000 md and shows no simple correlation with porosity. Pore types, however, are important in determining permeability. Macropore types include intergranular, intragranular, intercrystalline, moldic, and vuggy to cavernous. Micropore types include both primary and secondary intercrystalline pores. Moldic pores occur as either isolated molds or connected into an open pore network. On the basis of the most abundant pore type, samples with intercrystalline porosity show the highest permeability (median = 1041 md), followed by those with connected-moldic pores (median = 529 md), and then by those with intergranular pores (median = 123 md). Moldic pores are generally considered not to contribute to permeability because they are often isolated from other pores. Many of these samples, however, have moldic pores that are well connected in a continuous pore network, As a result, these molds contribute to, and even control, the permeability. The permeability distribution in the cores can be related to the original lithology and to diagenesis, because both control the pore types present. Meteoric diagenesis of shallow-water facies leads to generally low matrix permeability (median = 9 md), but the permeability is controlled by vuggy to cavernous porosity that we cannot measure. Deeper-water facies were altered in the marine burial environment, and are characterized by either moldic porosity with minimal cementation, or neomorphism with nearly complete cementation. Peloidal sediments compacted early and show little diagenetic alteration. The poorly cemented skeletal intervals have moderate to high permeability (range 0.1-8445 md) generally controlled by the degree of connectivity between moldic pores. The peloidal and well-cemented skeletal intervals have low permeability (range 0.1-198 md), reflecting the controlling role of microporosity. Permeability in the dolomitized portion of Unda, the more proximal core, is high (median = 1274 md) due to the predominance of intercrystalline porosity. On the basis of this study, the most important factor controlling permeability in these young carbonates is the specific pore type rather than the amount of porosity. In addition, the principal pore type can be related to the diagenesis and, to a lesser degree, the depositional facies. Although intercrystalline porosity from dolomitization and vuggy porosity from meteoric diagenesis have long been known to control permeability where they occur, this study also documents the importance of the connected-moldic porosity that forms during marine burial diagenesis.

This publication has 17 references indexed in Scilit: