Evaluation of Cross-Linked Polyamide 6 Micro-Indentation Properties: TAIC Concentration and Electron Radiation Intensity
Open Access
Abstract
Nowadays, technical practice puts emphasis on improving selected material properties of polymers which could lead to new applications. Material properties can be modified in numerous ways, among which is radiation treatment. This study looks into the influence of beta radiation on several properties of polyamide 6, e.g., indentation hardness, modulus and creep. Main changeable parameters were the concentration of triallyl isocyanurate (TAIC), which promotes cross-linking, and intensity of radiation. The concentration was in the range from 2 to 6 wt.%, while the radiation dose was 0, 66, 99 and 132 kGy. The treated materials were measured for indentation hardness, modulus and creep. Degree of cross-linking was verified by thermo-mechanical analysis (TMA), while degradation processes was investigated by Fourier-transform infrared spectroscopy (FTIR). The results indicate that electron radiation positively affects the tested material properties. The best results were seen in polyamide with 6 wt.% of TAIC, which demonstrated a 38% improvement in mechanical properties after exposure to 132 kGy. This improvement in properties affects the final parts and their application (e.g., in the automotive industry—engine parts; in electrical engineering—insulation of wires and cables; and in industry—pipes for underfloor heating, etc.).Keywords
Funding Information
- TBU in Zlin Internal Grant Agency (No. IGA/FT/2023/005)
This publication has 19 references indexed in Scilit:
- Crosslinking of polyamide-6 initiated by proton beam irradiationRadiation Physics and Chemistry, 2017
- Injection Molding Process Control, Monitoring, and Optimization2016
- Morphological, Rheological, and Mechanical Properties of Polyamide 6/Polypropylene Blends Compatibilized by Electron-Beam Irradiation in the Presence of a Reactive AgentMaterials, 2016
- Rheological and mechanical properties of polyamide 6 modified by electron-beam initiated mediation processRadiation Physics and Chemistry, 2015
- The effect of electron beam irradiation on properties of virgin and glass fiber-reinforced polyamide 6Radiation Physics and Chemistry, 2014
- Polyamide-6: The effects on mechanical and physicochemical properties by electron beam irradiation at different temperaturesRadiation Physics and Chemistry, 2014
- Electron beam irradiated polyamide-6 at different temperaturesRadiation Physics and Chemistry, 2013
- Effect of electron beam irradiation on mechanical and thermal properties of waste polyamide copolymer blended with nitrile‐butadiene rubberPolymers for Advanced Technologies, 2009
- Radiation processing of Nylon 6 by e-beam for improved properties and performanceRadiation Physics and Chemistry, 2009
- Electron beam induced crosslinking of nylon 6 with and without the presence of TACPolymer Degradation and Stability, 2005