Fracture behavior of Mg–Li matrix composites

Authors:

Abstract
Deformation and fracture of Saffil fiber (SF) reinforced Mg, Mg-8 wt.% Li and Mg-12 wt.% Li composites was monitored by means of in-situ scanning electron microscopy during 3-point bend tests. Mg and MgLi matrix composites (10 vol.% SF) were prepared by the melt infiltration technique. Poor interfacial bond causes premature failure of the SF/Mg composite that is usually triggered by the debonding of perpendicular fibers at the convex composite surface. Strong interfaces in SF/Mg12Li composite result in multiple cross-breakage of aligned fibers which is indicative of their participation in the composite strengthening. Resultant composite strengthening is frustrated by massive stress relaxation of the Mg12Li matrix. Strong interfaces and fairly high strength of the Mg8Li matrix cause remarkable strengthening of SF/Mg8Li composites. The cleavage of phases in two-phase Mg8Li matrix plays an insignificant role in the composite failure.

This publication has 10 references indexed in Scilit: