Multiple DLL architecture for multipath recovery in navigation receivers
Authors:
- 1 January 2004
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 2848-2851
Abstract
Smce the Selective Availability was turned off, one of the major error sources in GNSS user positioning is represented by the deleterious superimposition of the same SIS due to obstruction and ground reflections (multipath). Such an ermr component is the most critical in case of urban (or indoor) navigation due to the high density of possible scatterers around the receiver. In this paper, a multiple Delay Lock Loop (DLL) architecture for navigation receivers, which is derived from the philosophy of the RAKE receiver for communication, is proposed. In this sense, it is quite diITerent from common multipath rejection techniques almady proposed, where the multipath is not tracked. Simulation mults of the innovative scheme highlight the increased performance with respect to common multipath rejection techniquesKeywords
This publication has 6 references indexed in Scilit:
- Employment of a multipath receiver structure in a combined GALILEO/UMTS receiver2003
- Using of RAKE receiver architecture for combining GNSS and CDMA cellular wireless location2003
- Using diversity of satellite channels for navigation systems2002
- Performance comparison of multipath mitigating receiver architectures2002
- GPS positioning in a multipath environmentIEEE Transactions on Signal Processing, 2002
- GPS receiver architectures and measurementsProceedings of the IEEE, 1999