Development of radio telescope receiver based on GNU radio and USRP
Authors:
- 1 November 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This paper presents the development of radio telescope receiver based on GNU radio and Universal Software Radio Peripheral (USRP). Usually an existing radio telescope receiver is only able to be used for fixed frequency and signal processing system; hence the other different frequency receiver needs to be carried out with different types of observation. Here, the development of radio telescope receiver includes the hardware system and the signal processing system. Then, the design of radio telescope receiver is developed based on GNU Radio and implemented by using USRP. From the result, it shows that the implemented radio telescope receiver which is applied for continuum observation can clearly detect signals at frequencies of 322MHz and 406MHz n which those frequencies are usually used in radio telescope.Keywords
This publication has 5 references indexed in Scilit:
- Test setup and spurious replicas identification in time-quantized pseudorandom sampling-based ADC in SDR multistandard receiver2011
- GNU Radio based software-defined FMCW radar for weather surveillance application2011
- A complexity cost function for a network of WCDMA basestations using software defined radio with multi-user detection2005
- Enabling technologies for software defined radio transceivers2003
- Practical Amateur Astronomy Celestial Objects for Modern Telescopes2002