Influence of Addition of Different Nanoparticles on the Surface Properties of Poly(methylmethacrylate) Denture Base Material
- 31 March 2020
- journal article
- research article
- Published by Wiley in Journal of Prosthodontics
- Vol. 29 (5) , 422-428
Abstract
Purpose: To evaluate and compare the surface properties (roughness and hardness) of poly(methylmethacrylate) denture base material modified with zirconium dioxide (ZNPs), silicon dioxide (SNPs), and diamond (DNPs) nanoparticles.Materials and methods: Two hundred sixty heat‐polymerized acrylic resin disks (15 × 2 mm) were prepared. ZNPs, SNPs, and DNPs were added in concentrations of 0%, 0.5%, 1.0%, 2.5%, and 5.0% by weight of acrylic powder. This yielded a total of 13 groups for each test according to filler type and concentration (n = 10/group). The control group was made of pure acrylic. A mechanical polisher was used to standardize specimens’ surfaces before testing. A profilometer and Vickers hardness indenter were used to test the surface roughness and hardness, respectively. ANOVA and Tukey post hoc tests were used for data analysis (α = 0.05).Results: In comparison to control, results showed a nonsignificant increase in surface roughness (Ra) of acrylic material after the addition of 0.5% nanoparticles (ZNPs p = 0.168, SNPs p = 0.166, and DNPs p = 0.177), while a significant increase was seen with all other concentrations (p ˂ 0.05). Ra values of ZNP and DNP groups were significantly higher than those of the SNPs group (p < 0.001). The addition of any of the fillers to acrylic denture base materials significantly increased the hardness (p ˂ 0.05), with ZNPs and DNPs having values lower than those of the SNPs group (p < 0.001).Conclusions: Although nanofiller addition increased the hardness of denture base material, Ra was adversely affected when the concentration exceeded 0.5%. Therefore, 0.5% is suggested to be the most appropriate ratio to improve hardness with acceptable Ra.Keywords
This publication has 25 references indexed in Scilit:
- Reinforcement of PMMA Denture Base Material with a Mixture of ZrO2Nanoparticles and Glass FibersInternational Journal of Dentistry, 2019
- PMMA denture base material enhancement: a review of fiber, filler, and nanofiller additionInternational Journal of Nanomedicine, 2017
- Poly(methyl-methacrylate) nanocomposites with low silica additionThe Journal of Prosthetic Dentistry, 2014
- Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resinsThe Journal of Advanced Prosthodontics, 2013
- Effect of Incorporation of Silane‐Treated Silver and Aluminum Microparticles on Strength and Thermal Conductivity of PMMAJournal of Prosthodontics, 2012
- Dispersions of nanosilica in biocompatible copolymersPolymer Degradation and Stability, 2010
- The future of complete dentures in oral rehabilitation. A critical reviewJournal of Oral Rehabilitation, 2010
- Preparation of Polymer-Nanodiamond Composites with Improved PropertiesAdvanced Materials Research, 2008
- Effect of flexibility of grafted polymer on the morphology and property of nanosilica/PVC compositesApplied Surface Science, 2008
- PMMA/silica nanocomposite studies: Synthesis and propertiesJournal of Applied Polymer Science, 2004