Investigation of a Novel Dual-Side PM Vernier Machine With Two-Slot-Pitch Coils
- 19 June 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (1) , 2108-2119
Abstract
Permanent magnet vernier (PMV) machines exhibit high torque density but low power factor. Selecting low pole ratios (PR) and adopting two-slot-pitch coils have been proven to be efficient in enlarging the power factor of the PMV machines. However, the low PR results in lower torque density. Moreover, due to the different winding configurations of the two-slot-pitch coils, only some of which can denote high power factors. To improve the torque density and power factor simultaneously, outer-rotor dual-side PMV (DPMV) machines adopting two-slot-pitch coils and relatively low PR are introduced in this article. Moreover, the comparative analysis of torque production mechanisms of DPMV machines adopting different two-slot-pitch coils is presented. Since the stator-PM arrangements of the compared DPMV machines are different due to the different winding pole numbers, the electromagnetic characteristics are distinct. First, the PM-MMF-permeance-based analytical model is built to analyze the bidirectional flux modulation effects and reveal the sources of working airgap flux field harmonics of the investigated DPMV machines. The key performances of the DPMV machines with different winding configurations and pole ratios are investigated and compared. It indicates that when the stator-PMs are arranged to be a PM-core-PM-core sequence, the DPMV machines with two-slot-pitch coils can achieve significantly improved torque density and power factor. Finally, an 18-stator-slot/13-pole-pair DPMV prototype is tested and the measured results indicate that the proposed DPMV prototype has a torque density of up to 18.0 N·m/L and a power factor of 0.93.Keywords
Funding Information
- National Natural Science Foundation of China (51991382, 51991381)
- Industry-University-Research Cooperation Project of Aero Engine Corporation of China (HFZL2022CXY033)
This publication has 29 references indexed in Scilit:
- A Novel DC-Biased Current Dual PM Vernier MachineIEEE Transactions on Industry Applications, 2021
- Reduction of Saturation and Unipolar Leakage Flux in Consequent-Pole PMV MachineIEEE Journal of Emerging and Selected Topics in Power Electronics, 2021
- Synthesis of a Flux Modulation Machine With Permanent Magnets on Both Stator and RotorIEEE Transactions on Industry Applications, 2020
- Design and Performance Comparison of Vernier and Conventional PM Synchronous Wind GeneratorsIEEE Transactions on Industry Applications, 2020
- A Novel Dual-Sided PM Machine with Stator Spoke-Type PM Structure2019
- Design and Analysis of a Novel Synthetic Slot Dual-PM MachineIEEE Access, 2019
- Dual‐stator consequent‐pole Vernier PM motor with improved power factorIET Electric Power Applications, 2019
- Investigation of Spoke Array Permanent Magnet Vernier Machine With Alternate Flux BridgesIEEE Transactions on Energy Conversion, 2018
- Consequent-Pole Toroidal-Winding Outer-Rotor Vernier Permanent-Magnet MachinesIEEE Transactions on Industry Applications, 2015
- Theory and optimum design of PM Vernier motor1995