Development of DISI Engine Utilizing a Fan-Shaped Spray Jet
Authors:
- 8 April 2013
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A new combustion concept for DISI gasoline engine was developed to achieve superior performances of high power and low environmental load. It realizes a high specific power and a good lean combustion performance simultaneously by utilizing a DI spray jet effectively to accelerate the in-cylinder tumble flow. Injection direction and configuration of the DI spray was optimized for intensification of the in-cylinder flow and high mixture homogeneity, a thin fan-shaped spray generated by a slit nozzle was adopted. As a result, combustion was accelerated by increase of in-cylinder turbulence intensity, and homogeneity of air-fuel mixture was improved.In addition, in-cylinder fuel wall wetting, which causes emission of particulate matter (PM) and oil dilution, was drastically reduced by improvement of the fan-shaped spray. Atomization of the modified DI spray was improved by reduction of pressure loss inside the nozzle, utilization of fuel flow turbulence such as cavitation arising in the slit nozzle and raise of the fuel pressure. Furthermore penetration of the spray was reduced by its higher dispersion and the fine atomization.The DI spray improvement also contributes to the high environmental performance which is realized by the fast catalyst heating. Ignition retard stratified combustion was stabilized and emission of unburned HC was reduced in the operation. As a result, the environmental performance is secured to be compatible with the super ultra low emission vehicle (SULEV) standard in North America.Keywords
This publication has 14 references indexed in Scilit:
- Development of V-6 3.5-liter Engine Adopting New Direct Injection SystemSAE International Journal of Advances and Current Practices in Mobility, 2006
- Emission Reduction of a Stoichiometric Gasoline Direct Injection EngineSAE International Journal of Advances and Current Practices in Mobility, 2005
- Development of a New V-6 High Performance Stoichiometric Gasoline Direct Injection EngineSAE International Journal of Advances and Current Practices in Mobility, 2005
- Analysis of Flow and Cavitation Phenomena in Diesel Injection Nozzles and Its Effects on Spray and Mixture FormationSAE International Journal of Advances and Current Practices in Mobility, 2003
- Application of a New Combustion Concept to Direct Injection Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 2000
- Further Studies of Cavitation and Atomization in Diesel InjectionSAE International Journal of Advances and Current Practices in Mobility, 1999
- Cavitation in Two-Dimensional Asymmetric NozzlesSAE International Journal of Advances and Current Practices in Mobility, 1999
- Analysis of the Flow in the Nozzle of a Vertical Multi-Hole Diesel Engine InjectorSAE International Journal of Advances and Current Practices in Mobility, 1998
- Development of Direct Injection Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 1997
- Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on AtomizationSAE International Journal of Advances and Current Practices in Mobility, 1995