Experimental Characterization of Plasmonic Sensors Based on Lab-Built Tapered Plastic Optical Fibers
Open Access
- 26 June 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (12) , 4389
Abstract
In this work, we have compared several configurations of surface plasmon resonance (SPR) sensors based on D-shaped tapered plastic optical fibers (TPOFs). Particularly, the TPOFs used to obtain the SPR sensors are made by a lab-built system based on two motorized linear positioning stages and a heating plate. Preliminarily, a comparative analysis has been carried out between two different configurations, one with and one without a thin buffer layer deposited between the core of TPOFs and the gold film. After this preliminary step, we have used the simpler configuration, obtained without the buffer layer, to realize different SPR D-shaped TPOF sensors. This study could be of interest in SPR D-shaped multimode plastic optical fiber (POF) sensors because, without the tapers, the performances decrease when the POF’s diameter decreases, whereas the performances improve in SPR D-shaped tapered POF sensors, where the diameter decreases in the D-shaped sensing area. The performances of the SPR sensors based on different taper ratios have been analyzed and compared. The SPR-TPOF sensors have been tested using water–glycerin mixtures with refractive indices ranging from 1.332 to 1.381 RIU. According to the theory, the experimental results have demonstrated that, as the taper ratio increases, the sensitivity of the SPR sensor increases as well, while on the contrary the signal-to-noise ratio (SNR) decreases.Keywords
This publication has 29 references indexed in Scilit:
- High selectivity and sensitivity sensor based on MIP and SPR in tapered plastic optical fibers for the detection of l-nicotineSensors and Actuators B: Chemical, 2014
- Performance Comparison of Two Sensors Based on Surface Plasmon Resonance in a Plastic Optical FiberSensors, 2013
- New trends in instrumental design for surface plasmon resonance-based biosensorsBiosensors and Bioelectronics, 2011
- Influence of Design Parameters on the Performance of a Surface Plasmon Sensor Based Fiber Optic SensorPlasmonics, 2008
- Surface plasmon resonance based tapered fiber optic sensor with different taper profilesOptics Communications, 2008
- Sensitivity of Optical Fiber Sensor Based on Surface Plasmon Resonance: Modeling and ExperimentsPlasmonics, 2008
- Present and future of surface plasmon resonance biosensorsAnalytical and Bioanalytical Chemistry, 2003
- Surface plasmon resonance sensors: reviewSensors and Actuators B: Chemical, 1999
- Chemical sensing by surface plasmon resonance in a multimode optical fibrePure and Applied Optics: Journal of the European Optical Society Part A, 1996
- A fiber-optic chemical sensor based on surface plasmon resonanceSensors and Actuators B: Chemical, 1993