The Flexural Strength and Flexural Modulus of Stereolithography Additively Manufactured Zirconia with Different Porosities
- 27 September 2021
- journal article
- research article
- Published by Wiley in Journal of Prosthodontics
- Vol. 31 (5) , 434-440
Abstract
Purpose: Additive manufacturing (AM) technologies are capable of fabricating complex geometries with different porosities. However, the effect of such porosities on mechanical properties of stereolithography (SLA) AM zirconia with different porosities is unclear. The purpose of this in vitro study was to investigate the mechanical properties namely flexural strength, and flexural modulus of AM zirconia with different porosities.Materials and Methods: A bar (25 × 4 × 3 mm) for flexural strength test (ISO standard 6872/2015) was designed by CAD software program and standard tessellation language (STL) file was obtained. The STL file was used to fabricate a total of 80 bars in four groups. Three experimental groups each containing 20 samples were manufactured using an SLA ceramic printer (CeraMaker 900; 3DCeram Co) and zirconia material (3DMix ZrO2 paste; 3DCeram Co) with different sintering post processing to achieve different porosities including 0%‐porosity (AMZ0), 20%‐porosity (AMZ20), and 40%‐porosity (AMZ40). The same STL file was used for subtractive manufacturing or milling of 20 zirconia bars as control group (CNCZ) with the same dimensions using a commercial zirconia. Three‐point bending tests were performed for all groups following ISO standard 6872/2015 specification using a universal testing machine. Outcomes measured included load at fracture, mean flexural strength, and flexural modulus and they were compared across the experimental groups using a one‐way ANOVA. Post hoc pair wise comparison between each pair of the groups were performed using Tukey test.Results: There was a significant difference between the four groups, in terms of fracture load, flexural strength and flexural modulus using one‐way ANOVA. AM zirconia with 0% porosity (AMZ0) showed the highest value for fracture load (1132.7 ± 220.6 N), flexural strength (755.1 ± 147.1 MPa) and flexural modulus (41,273 ± 2193 MPa) and AM zirconia with 40% porosity (AMZ40) showed the lowest fracture load (72.13 ± 13.42 N), flexural strength (48.09 ± 8.95 MPa) and flexural modulus (7177 ± 506 MPa). Tukey's pairwise comparisons detected a significant difference between all the possible pairs for all variables except flexural modulus between AMZ0 and CNCZ. The Weibull moduli presented the lowest value for AMZ20 (4.4) followed by AMZ40 (6.1), AMZ0 (6.1), and the highest value was for CNCZ (8.1).Conclusion: AM zirconia with 0% porosity showed significantly higher flexural strength and flexural modulus when compared to milled and AM zirconia with 20% and 40% porosities.Keywords
This publication has 54 references indexed in Scilit:
- A natural functionally graded biocomposite coating – Human enamelActa Biomaterialia, 2013
- Clinical performance of long‐span zirconia frameworks for fixed dental prostheses: 5‐year resultsJournal of Oral Rehabilitation, 2012
- Evaluation of Zirconium‐Oxide‐Based Ceramic Single‐Unit Posterior Fixed Dental Prostheses (FDPs) Generated with Two CAD/CAM Systems Compared to Porcelain‐Fused‐to‐Metal Single‐Unit Posterior FDPs: A 5‐Year Clinical Prospective StudyJournal of Prosthodontics, 2012
- Dental ceramics: An updateJournal of Conservative Dentistry, 2010
- Bio-inspired design of dental multilayers: Experiments and modelJournal of the Mechanical Behavior of Biomedical Materials, 2009
- Graded structures for damage resistant and aesthetic all-ceramic restorationsDental Materials, 2009
- Bioinspired design of dental multilayersMaterials Science and Engineering: A, 2007
- What are the longevities of teeth and oral implants?Clinical Oral Implants Research, 2007
- Fabrication of porous bioceramics with porosity gradients similar to the bimodal structure of cortical and cancellous boneJournal of Materials Science: Materials in Medicine, 2007
- Ceramics in dentistry: Historical roots and current perspectivesThe Journal of Prosthetic Dentistry, 1996