A Mechanics Model for the Moisture Induced Delamination in Fan-Out Wafer-Level Package
Authors:
- 1 June 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1205-1211
Abstract
The effect of moisture absorption on the risk of interface delamination in a fan-out (FO) wafer level package (WLP) was investigated by using experimental and numerical analyses. A double-cantilever-beam (DCB) fracture mechanics test was applied to quantify the degradation of interfacial debonding resistance due to moisture exposure. The driving forces of delamination on various interfaces in the FO WLP were evaluated by using a coupled hygro-thermo-mechanical model. The moisture diffusion related material models such as diffusivity, saturation concentration and the hygroscopic swelling of the polymer constituents in the FO package were characterized experimentally and implemented in the numerical stress model. The numerical model was applied to evaluate the transient stress evolutions at critical locations around the corners of the Si die during moisture sensitivity tests. It was observed that the moisture absorption degrades adhesion significantly. It also leads to a change in stress state around the corners of Si die from compression to tension, and as a result, significantly increase the risk of delamination.Keywords
This publication has 14 references indexed in Scilit:
- Analysis of fatigue delamination growth in flip-chip packageActa Mechanica, 2014
- Nonlinear Stress Modeling Scheme to Analyze Semiconductor Packages Subjected to Combined Thermal and Hygroscopic LoadingJournal of Electronic Packaging, 2008
- The Effects of Pre-Bond Moisture on the Fracture Behaviour of Adhesively-Bonded Composite JointsThe Journal of Adhesion, 2008
- Hygroscopic swelling and sorption characteristics of epoxy molding compounds used in electronic packagingIEEE Transactions on Components and Packaging Technologies, 2003
- Moisture-induced interfacial delamination growth in plastic IC packages during solder reflow2002
- Temperature-Dependent Popcorning Analysis of Plastic Ball Grid Array Package During Solder Reflow With Fracture Mechanics MethodJournal of Electronic Packaging, 1999
- Effect of geometric parameters on popcorn cracking in plastic packages during VPS processFinite Elements in Analysis and Design, 1998
- An experimental study of popcorning in plastic encapsulated microcircuitsIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1996
- A spectroscopic technique for in situ measurement of water at the coating/metal interfaceJournal of Adhesion Science and Technology, 1991
- Diffusion of moisture into two-phase polymersJournal of Materials Science, 1989