Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials
Open Access
Abstract
Polycarboxylate superplasticizers BMC-L and BMC-S were utilized as modifiers in the formulation of novel cement-based grouting materials. Indoor tests were conducted on 32 groups of cement slurries, varying by water–cement ratio (0.5:1 and 0.6:1) and modifier content (0, 2‰, 4‰, 6‰, 8‰, 10‰, 12‰, and 14‰), to test their density, funnel viscosity, water separation rate, and stone rate. Four groups of slurry modified with BMC-L were selected as the preferred slurry, and the apparent viscosity test, uniaxial, and triaxial compression test of the slurry stone body were conducted. The study investigated the influence of BMC-L on various properties of the slurry, including its apparent viscosity, uniaxial compressive strength, stress–strain relationships, shear strength parameters, and elastic modulus. Ultimately, the pore structure and phase composition of the slurry stone body were detected by Nuclear Magnetic Resonance (NMR) and X-ray Diffraction (XRD), and the impact of BMC-L on slurry performance was examined from a microstructural perspective. Results indicate that the two polycarboxylate superplasticizers exert minimal influence on the density and water separation rate of the slurry. Within the effective incorporation range of the polycarboxylate superplasticizer, increasing the dosage correlates with a decrease in both the stone rate and viscosity of the slurry. BMC-L significantly enhances the mechanical properties of the slurry stone body by promoting more complete cement hydration and reducing porosity. The uniaxial compressive strength of slurry stone body with a 6 ‰ BMC-L dosage reached 29.7 MPa after 7 days and 38.5 MPa after 28 days of curing, representing increases of 118.4% and 64%, respectively, compared to masonry with 0 BMC-L dosage. The shear strength parameters and elastic modulus of the slurry stone body also showed corresponding increases.Keywords
Funding Information
- The National Natural Science Foundation of China (51804157, 20237189)
- the Bingtuan Financial Science and Technology Project (51804157, 20237189)
This publication has 11 references indexed in Scilit:
- Optimization of the fresh and hardened properties of cement grouting material for semiflexible pavement using polypropylene fiberJournal of Sustainable Cement-Based Materials, 2023
- Study on the effect of mineral admixtures on working and mechanical properties of the grouting materialFrontiers in Materials, 2023
- Optimal formulation design of polymer-modified cement based grouting material for loose depositsConstruction and Building Materials, 2020
- A literature review on properties and applications of grouts for shield tunnelConstruction and Building Materials, 2020
- Fractal Analysis of Pore Structure Development of Sandstone: A Nuclear Magnetic Resonance InvestigationIEEE Access, 2019
- Experimental investigations on the effects of ambient freeze-thaw cycling on dynamic properties and rock pore structure deterioration of sandstoneCold Regions Science and Technology, 2018
- Effect of different superplasticisers on the physical and mechanical properties of cement groutsConstruction and Building Materials, 2014
- Correlations Between NMR-Relaxation Response and Relative Permeability From Tomographic Reservoir-Rock ImagesSPE Reservoir Evaluation & Engineering, 2013
- Study on the Quick Hardening Cement-Based Grouting Material's Modification by Nano-MaterialsApplied Mechanics and Materials, 2013
- Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastesAdvances in Cement Research, 2005