Improving Mechanical and Corrosion Behavior of 5052 Aluminum Alloy Processed by Cyclic Extrusion Compression
Open Access
Abstract
Background The severe plastic deformation approach and its well-known cyclic extrusion compression (CEC) method have been established as a powerful tool for fabricating bulk ultrafine-grained metals and alloys with improved properties. Objective This study focused on the microstructure evolution, hardness behavior, and corrosion properties of the CEC-processed Al5052 up to four passes compared to the initial annealed state. Methods The initial and CEC-processed Al5052 samples at different pass numbers were examined experimentally by EBSD analyses, hardness measurements, and corrosion resistance. Results Substantial grain refinement was attained from ~23 μm for the annealed sample to ~0.8 μm in the four passes sample. In addition, the hardness values considerably increased up to 75.7% after four passes from the initial value of 80 HV. In addition, the increment of pass numbers led to a more uniform dispersion of hardness values. Furthermore, the production of more stable protective oxide layers on the UFG structure of the CEC-processed sample led to the improvement in electrochemical response with a corrosion rate reduction from 1.49 to 1.02 mpy, respectively, in the annealed and final pass CEC-processed samples. In fact, the annealed sample manifested more large-sized and deeper pits than the CECed samples due to the increment of potential values and electrochemical attack of chlorine ions that finally deteriorates the corrosion performance. Conclusions CEC is an efficient method to improve the mechanical properties of materials due to substantial microstructural changes along with enhancement of electrochemical behavior because of the presence of small-sized and shallow pits.Keywords
This publication has 60 references indexed in Scilit:
- Formation of ultra-fine copper grains in copper-clad aluminum wireScripta Materialia, 2010
- Effect of Grain Size on Corrosion: A ReviewCorrosion, 2010
- Corrosion behavior of copper alloys in chloride mediaMaterials & Design (1980-2015), 2009
- The Evolution of Microstructure and Mechanical Properties of a 5052 Aluminium Alloy by the Application of Cryogenic Rolling and Warm RollingMATERIALS TRANSACTIONS, 2009
- Effects of severe plastic deformation on the corrosion behavior of aluminum alloysJournal of Solid State Electrochemistry, 2008
- Corrosion and tensile behaviors of ultra-fine grained Al–Mn alloy produced by accumulative roll bondingMaterials Science and Engineering: A, 2007
- Recent development in aluminium alloys for the automotive industryMaterials Science and Engineering: A, 2000
- Light weight materials for automotive applicationsMaterials Characterization, 1995
- Advances in aluminium alloy products for structural applications in transportationJournal de Physique IV, 1993
- The effect of unlimited cumulation of large plastic strains on the structure-softening processes of 99.999 AlMaterials Science and Engineering: A, 1990