Electrical conductivity and electric modulus of stable Kevlar® fiber loaded HAF/NBR rubber composite
- 18 October 2011
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 124 (2) , 1359-1365
Abstract
DC, AC conductivities and dielectric properties of high abrasion furnace carbon black (HAF)/acrylonitrile butadiene rubber (NBR) composite have been studied with varying the aramide Stable Kevlar® fiber content, temperature, and frequency. Generally, the electrical conductivity was decreased with increasing Stable Kevlar® fiber content, which was confirmed by the positron annihilation lifetime spectroscopy. Negative temperature coefficient of conductivity (NTCC) behavior between 353 and 413 K was detected, except for the composite containing 10 phr Kevlar which showed positive temperature coefficient of conductivity (PTCC) behavior above 383 K. These NTCC and PTCC behaviors were further manifested by differential scanning calorimetry (DSC). For the composite with 10 phr Kevlar, the interfacial polarization between the fibers and the polymeric composite can be ascribed to Maxwell‐Wagner‐Sillars mechanism. The (MWS) relaxation disappeared for higher fibers content. The analysis of the electric modulus in the frequency range from 1 kHz to 1 MHz shows that the interfacial relaxation obeys Cole–Davison distribution of relaxation times. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 21 references indexed in Scilit:
- Electrical and dielectric behaviors and their origins in the three-dimensional polyvinyl alcohol/MWCNT composites with low percolation thresholdCarbon, 2009
- Properties of syndiotactic polystyrene composites with surface modified short Kevlar fiberMaterials Science and Engineering: A, 2006
- Positive temperature coefficient effect of LMWPE–UHMWPE blends filled with short carbon fibersCarbon, 2004
- New double negative and positive temperature coefficients of conductive EPDM rubber TiC ceramic compositesEuropean Polymer Journal, 2002
- Electrical properties of polyethylene and carbon black particle blends prepared by gelation/crystallization from solutionCarbon, 2002
- Simple model for the temperature-dependent compressive strength of polymer fibersMaterials Letters, 2000
- Morphology and electrical conductivity of ultrahigh-molecular-weight polyethylene-low-molecular-weight polyethylene-carbon black composites prepared by gelation /crystallization from solutionsColloid and Polymer Science, 1999
- Electric modulus and interfacial polarization in composite polymeric systemsJournal of Materials Science, 1998
- Studies on the PTC/NTC effect of carbon black filled low density polyethylene compositesEuropean Polymer Journal, 1997
- Electrical behavior of carbon black‐filled polymer composites: Effect of interaction between filler and matrixJournal of Applied Polymer Science, 1994