Exploding foils with artificial structure as a source of ultraviolet radiation
Open Access
- 17 July 2023
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (3)
Abstract
The results of the study of radiation produced by the electrical explosion of Al foil with a thickness of 4 μm with an artificial periodic structure of periodic holes with 50–400 μm steps created by laser engraving are presented. The experiments were carried out on a KING pulse high-current generator (220 kA, 40 kV, 300 ns). Images of exploded foils were recorded using pinhole cameras with a 20 μm aperture on a four-frame microchannel plate camera with 5 ns temporal resolution. In experiments on the electrical explosion of thin foils, it was shown that the application of an artificial periodic structure to the foil leads to a much more uniform radiation in the UV spectrum range along the entire length and width of the foil. Uniform radiation was observed from 20 to 70 ns. It is shown that such radiation can be used for the imaging of test objects or plasma objects like exploded wires.Keywords
Funding Information
- Russian Science Foundation (23-19-00524)
This publication has 15 references indexed in Scilit:
- A Study of the Ultraviolet Radiation of Hybrid X-PinchesPlasma Physics Reports, 2020
- Finding the “lost-time” in detonator functionApplied Physics Letters, 2019
- Evolution of X-pinch loads for pulsed power generators with current from 50 to 5000 kAMatter and Radiation at Extremes, 2018
- A Study of Thin Foil ExplosionIEEE Transactions on Plasma Science, 2018
- A review of projection radiography of plasma and biological objects in X-Pinch radiationPlasma Physics Reports, 2016
- Hybrid X-pinch with conical electrodesPhysics of Plasmas, 2010
- Study on metal foil explosion using high current2009
- Point-projection x-ray radiography using an X pinch as the radiation sourceReview of Scientific Instruments, 2001
- The current density and the specific energy input in fast electrical explosionIEEE Transactions on Plasma Science, 1999
- Fielding and calibration issues for diamond photoconducting detectorsReview of Scientific Instruments, 1997