Laboratory measurement of material electrical properties: Extending the application of lumped‐circuit equivalent models to 1 GHz
Authors:
Open Access
- 1 March 2000
- journal article
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 35 (2) , 371-383
Abstract
For measurements of material electrical properties in a frequency range from 1 kHz to 1 GHz, we used a laboratory method based on the concept of lumped R, L, and C circuit elements. While this method has typically been used at frequencies of less than 100 MHz, we have extended its application up to 1 GHz. The complex electrical parameters of a material, such as resistivity, conductivity, and dielectric permittivity were obtained by measuring magnitude Z and phase ϕ of the sample impedance Z. We relate the material electrical parameters to either series or parallel lumped‐circuit equivalent models. Depending on the frequency range, two different designs of the sample holder can be used: (1) a parallel‐plate capacitor with disk electrodes, for low frequencies (from 1 kHz to 100 MHz), and (2) a coaxial capacitor, for a broad band up to higher frequencies (from 1 kHz to 1 GHz). Measured values of the sample impedance usually include errors due to effects from the sample holder and its connections to the instrument. These effects, caused by the inductance, resistance, and stray capacitance of the measuring system, are taken into account. Our measurements of several standard materials, including air, Teflon, octanol, butanol, and methanol, showed that the relative standard deviation from the mean for the dielectric permittivity (in the range where it is frequency independent) is typically less than 1%. The difference between our mean values and previously published values for these standard materials is also less than 1%.Keywords
This publication has 28 references indexed in Scilit:
- Time-domain measurement of the electromagnetic properties of materialsIEEE Transactions on Microwave Theory and Techniques, 1998
- An improved technique for permittivity measurements using a coaxial probeIEEE Transactions on Instrumentation and Measurement, 1997
- A method for measuring the permittivity without ambiguity using six-port reflectometerIEEE Transactions on Instrumentation and Measurement, 1993
- Preface1987
- Dielectric spectroscopy using monopole antennas of general electrical lengthIEEE Transactions on Antennas and Propagation, 1986
- Relaxation phenomena and induced polarizationGeoexploration, 1984
- Precise and Easy Method of TDR to Obtain Dielectric Relaxation Spectra in GHz RegionJapanese Journal of Applied Physics, 1982
- In Vivo Probe Measurement Technique for Determining Dielectric Properties at VHF through Microwave FrequenciesIEEE Transactions on Microwave Theory and Techniques, 1980
- Comparative studies of various methods in time domain spectroscopyThe Journal of Chemical Physics, 1980
- The electrical properties of soil at frequencies up to 100 megacycles per second; with a note on the resistivity of ground in the United KingdomProceedings of the Physical Society (1926-1948), 1935