High-Chromium (9-12Cr) Steels: Creep Enhancement by Conventional Thermomechanical Treatments
Open Access
- 14 January 2021
- book chapter
- Published by IntechOpen
Abstract
There is a worldwide need to develop materials for advanced power plants with steam temperatures of 700°C and above which have the capacity to achieve high efficiency and low CO2 emissions. This request involves the development of new grades of 9-12Cr heat-resistant steels, with a nanostructured martensite, mainly focusing on the long-term creep rupture strength of base metal and welded joints, creep-fatigue properties, and microstructure evolution during exposure at such elevated temperatures. The main shortcomings of actual 9-12Cr high-chromium steels are that the creep resistance is not enough to fulfill the engineering requirements at temperatures higher than 600°C and the material undergoes a cyclic softening. Creep strength at high temperature could be improved by a microstructural optimization through nano-precipitation, guided by computational thermodynamics, and thermomechanical control process optimization.Keywords
This publication has 64 references indexed in Scilit:
- Mapping the parent austenite orientation reconstructed from the orientation of martensite by EBSD and its application to ausformed martensiteActa Materialia, 2010
- High-temperature mechanical properties improvement on modified 9Cr–1Mo martensitic steel through thermomechanical treatmentsJournal of Nuclear Materials, 2010
- Ferritic/martensitic steels for next-generation reactorsJournal of Nuclear Materials, 2007
- New nano-particle-strengthened ferritic/martensitic steels by conventional thermo-mechanical treatmentJournal of Nuclear Materials, 2007
- Creep mechanisms of ferritic oxide dispersion strengthened alloysJournal of Materials Processing Technology, 2003
- Ferritic/martensitic steels – overview of recent resultsJournal of Nuclear Materials, 2002
- Creep rates and strengthening mechanisms in tungsten-strengthened 9Cr steelsMaterials Science and Engineering: A, 2001
- Strain heterogeneity and the production of coarse grains in mechanically alloyed iron-based PM2000 alloyMaterials Science and Engineering: A, 2001
- Material properties from small specimens using the punch and bulge testThe Journal of Strain Analysis for Engineering Design, 1999
- Ferritic/martensitic steels: promises and problemsJournal of Nuclear Materials, 1992