Effect of Hydrogen‐Water Atmospheres on Corrosion and Flexural Strength of Sintered α‐Silicon Carbide
Authors:
- 8 March 1990
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 73 (3) , 694-699
Abstract
Sintered α‐SiC was exposed for 10 h to H 2 containing various partial pressures of H 2 O ( P H2O from 5×10 −6 to 2×10 −2 atm; 1 atm≅10 5 Pa) at 1300° and 1400°C. Weight loss, surface morphology, and room‐temperature flexural strength were strongly dependent on P H2O . The strength of the SiC was not significantly affected by exposure to dry H 2 at a P H2O of 5×10 −6 atm; and following exposure at P H2O >5×10 −3 atm, the strength was even higher than that of the as‐received material. The increase in strength is thought to be the result of crack blunting associated with SiO 2 formation at crack tips. However, after exposure in an intermediate range of water vapor pressures (1×10 −5 < P H2O −3 atm), significant decreases in strength were observed. At a P H2O of about 1×10 −4 atm, the flexural strength decreased approximately 30% and 50% after exposure at 1300° and 1400°C, respectively. The decrease in strength is attributed to surface defects caused by corrosion in the form of grain‐boundary attack and the formation of pits. The rates of weight loss and microstructural changes on the exposed surfaces correlated well with the observed strength changes.Keywords
This publication has 15 references indexed in Scilit:
- Effect of High-Temperature Hydrogen Exposure on Sintered α-SiCAdvanced Ceramic Materials, 1988
- Multielement Mapping of α-SiC by Scanning Auger MicroscopyAdvanced Ceramic Materials, 1987
- Oxidation Kinetics of Silicon Carbide Crystals and Ceramics: I, In Dry OxygenJournal of the American Ceramic Society, 1986
- The Active Oxidation of Si and SiC in the Viscous Gas‐Flow RegimeJournal of the Electrochemical Society, 1976
- The high-temperature oxidation, reduction, and volatilization reactions of silicon and silicon carbideOxidation of Metals, 1972
- Active to passive transition in the oxidation of SiCCorrosion Science, 1971
- Etching Characteristics of Silicon Carbide in HydrogenJournal of the Electrochemical Society, 1969
- The Oxidation of Silicon Carbide at 1150° to 1400°C and at 9 × 10[sup −3] to 5 × 10[sup −1] Torr Oxygen PressureJournal of the Electrochemical Society, 1966
- Chemical Etching of Silicon Carbide with HydrogenJournal of the Electrochemical Society, 1965
- Oxidation Behavior of Silicon CarbideJournal of the American Ceramic Society, 1958