Temperature-Robust 0.48-V FD-SOI Intermittent Startup Circuit with 300-nA Quiescent Current for Batteryless Wireless Sensor Capable of 1-μA Energy Harvesting Sources
Authors:
- 1 February 2021
- journal article
- research article
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
- Vol. E104.A (2) , 506-515
Abstract
A temperature-variation-tolerant intermittent startup circuit (ISC) that suppresses quiescent current to 300nA at 0.48V was developed. The ISC is a key circuit for a batteryless wireless sensor that can detect a 1μA generation current of energy harvesting sources from the intervals of wireless signals. The ISC consists of an ultralow-voltage detector composed of a depletion-type MOSFET and low-Vth MOSFETs, a Dickson-type gate-boosted charge pump circuit, and a power-switch control circuit. The detector consists of a voltage reference comparator and a feedback-controlled latch circuit for a hysteresis function. The voltage reference comparator, which has a common source stage with a folded constant-current-source load composed of a depletion-type nMOSFET, makes it possible to reduce the temperature dependency of the detection voltage, while suppressing the quiescent current to 300nA at 0.48V. The ISC fabricated with fully-depleted silicon-on-insulator (FD-SOI) CMOS technology also suppresses the variation of the quiescent current. To verify the effectiveness of the circuit, the ISC was fabricated in a 0.8-μm triple-Vth FD-SOI CMOS process. An experiment on the fabricated system, the ISC boosts the input voltage of 0.48V to 2.4V while suppressing the quiescent current to less than 300nA at 0.48V. The measured temperature coefficient of the detection voltage was ±50ppm/°C. The fluctuation of the quiescent current was 250nA ± 90nA in the temperature range from 0°C to 40°C. An intermittent energy harvesting sensor with the ISC was also fabricated. The sensor could detect a generation current of 1μA at EH sources within an accuracy of ±15% in the temperature range from 0°C to 40°C. It was also successfully applied to a self-powered wireless plant-monitoring sensor system.Keywords
This publication has 13 references indexed in Scilit:
- Robust Self-powered Wireless Plant-monitoring Sensor System with Sap-activated BatteryJournal of Physics: Conference Series, 2019
- Review of Power Conversion and Energy Management for Low-Power, Low-Voltage Energy Harvesting Powered Wireless SensorsIEEE Transactions on Power Electronics, 2019
- A 60 mV Input Voltage, Process Tolerant Start-Up System for Thermoelectric Energy HarvestingIEEE Transactions on Circuits and Systems I: Regular Papers, 2018
- An 88% Efficiency 0.1–300- $\mu$ W Energy Harvesting System With 3-D MPPT Using Switch Width Modulation for IoT Smart NodesIEEE Journal of Solid-State Circuits, 2018
- Review of Micro Thermoelectric GeneratorJournal of Microelectromechanical Systems, 2018
- An Indoor Solar Energy Harvester with Ultra-Low-Power Reconfigurable Power-On-Reset-Styled Voltage Detector2018
- Design of Transformer-Based Boost Converter for High Internal Resistance Energy Harvesting Sources With 21 mV Self-Startup Voltage and 74% Power EfficiencyIEEE Journal of Solid-State Circuits, 2014
- An Interface Circuit for Low-Voltage Low-Current Energy Harvesting SystemsIEEE Transactions on Power Electronics, 2014
- 50 mV-Input Batteryless Boost Converter for Thermal Energy HarvestingIEEE Journal of Solid-State Circuits, 2013
- Startup Techniques for 95 mV Step-Up Converter by Capacitor Pass-On Scheme and ${\rm V}_{\rm TH}$-Tuned Oscillator With Fixed Charge ProgrammingIEEE Journal of Solid-State Circuits, 2012