Modification Effects of Nano-SiO2 on Early Compressive Strength and Hydration Characteristics of High-Volume Fly Ash Concrete
Authors:
- 1 June 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (6)
Abstract
Utilization of nanomaterials in high-volume fly ash (HVFA) concrete as a means of improving concrete’s properties is feasible. This paper presents experimental data to evaluate the modification effects of (NS) on early compressive strength and hydration properties of HVFA concrete. To this end, a mixture design method was used to experimentally investigate the early compressive strength development in the NS-incorporated HVFA concrete. For a better understanding of the modification process, several important hydration characteristics of the selected NS-incorporated HVFA cement pastes were analyzed for hydration kinetics, phase composition, and pore structure through isothermal calorimetry, X-ray diffraction (XRD), thermogravimetric/derivative thermogravimetric (TG/DTG), and mercury intrusion porosimetry (MIP) measurements. Experimental results confirmed that NS can partially compensate for the early compressive strength loss of HVFA concrete resulting from high levels of fly ash (FA) replacement. The regression model from mixture design based experiments indicated that the mixture proportion of 58% ordinary Portland cement (OPC), 40% (FA), and 2% (NS) produced the highest early compressive strengths of concrete at 22.9 and 29.0 MPa, for 3 and 7 days, respectively. Hydration characteristics revealed that the addition of NS enhanced early age cement hydration and the formation of calcium silicate hydrate (C-S-H) gels. It also showed a reduction in calcium hydroxide (CH) and porosity in HVFA cement pastes, further contributing to the early compressive strength development of HVFA concrete combined with NS.
Keywords
This publication has 39 references indexed in Scilit:
- Utilization of fly ash cenosphere as lightweight filler in cement-based composites – A reviewConstruction and Building Materials, 2017
- Problems review and suggestions for early high-strength, high-volume, low-lime fly ash concreteEuropean Journal of Environmental and Civil Engineering, 2015
- Statistical mixture design approach for eco-efficient UHPCCement and Concrete Composites, 2015
- Influence of porosity on compressive and tensile strength of cement mortarConstruction and Building Materials, 2013
- Hydration of Portland cement with high replacement by siliceous fly ashCement and Concrete Research, 2012
- A review on emission analysis in cement industriesRenewable and Sustainable Energy Reviews, 2011
- Evaluation of sustainable high-volume fly ash concretesCement and Concrete Composites, 2011
- Heat evolution of high-volume fly ash concreteCement and Concrete Research, 2002
- Optimal designs for experiments with mixtures: a surveyCommunications in Statistics - Theory and Methods, 2000
- Use of thermal analysis in the hydration studies of a type 1 portland cement produced from mineral tailingsThermochimica Acta, 1985