GeSn p-FinFETs with Sub-10 nm Fin Width Realized on a 200 mm GeSnOI Substrate: Lowest SS of 63 mV/decade, Highest Gm,int of 900 µS/µm, and High-Field µeff of 275 cm2/V•s
Authors:
- 1 June 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 197-198
Abstract
We report the first GeSn p-FinFETs with sub-10 nm fin width (W Fin ) enabled by the formation of the first 200 mm GeSn-on-insulator (GeSnOI) substrate and a self-limiting digital etch for accurate control of the fin dimension, achieving a fin with a top width of 5 nm. Owing to the excellent gate control using extremely scaled GeSn fin and the good GeSn fin quality maintained using a device fabrication process with low thermal budget, an SS of 63 mV/decade was achieved at channel length (L CH ) of 50 nm, which is a record low for Ge-based p-FETs. Furthermore, record high G m,int of 900 μS/μm (V DS of -0.5 V) and G m,int /S sat of 10.5 for GeSn p-FETs were achieved. A high high-field hole mobility μ eff of 275 cm 2 /V·s (at inversion carrier density N inv of 8×10 12 cm -2 ) was also obtained.Keywords
This publication has 3 references indexed in Scilit:
- Digital Etch Technique for Forming Ultra-Scaled Germanium-Tin (Ge 1−x Sn x ) Fin StructureScientific Reports, 2017
- Hole Mobility Enhancement in Compressively Strained ${\rm Ge}_{0.93}{\rm Sn}_{0.07}$ pMOSFETsIEEE Electron Device Letters, 2013
- Germanium–Tin (GeSn) p-Channel MOSFETs Fabricated on (100) and (111) Surface Orientations With Sub-400 $^{\circ}\hbox{C}\ \hbox{Si}_{2}\hbox{H}_{6}$ PassivationIEEE Electron Device Letters, 2013