Reference Current Computation Methods for Active Power Filters: Accuracy Assessment in the Frequency Domain
- 1 March 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 20 (2) , 446-456
Abstract
This paper focuses on the steady-state response of existing methods for computing the reference current of active power filters. For each class of methods, the main source of discrepancy between the load harmonic current and the computed reference current is identified and the frequency spectrum of the resulting error is analytically determined. Although this topic has been partially addressed in previous publications, the proposed frequency-domain approach provides valuable qualitative information about how the errors are produced and distributed, which is masked when the analysis is carried out in the time domain. First, the frequency-domain formulation is separately presented for each method. Then, a comparison of the resulting errors is performed on a case study. Finally, some experimental results are given to validate the proposed frequency-domain analysis.Keywords
This publication has 17 references indexed in Scilit:
- The reference active source current for active power filter in an unbalanced three-phase power system via the synchronous detection method2002
- Stationary frame harmonic reference generation for active filter systemsIEEE Transactions on Industry Applications, 2002
- Filtering of harmonic currents and damping of resonances in power systems with a hybrid-active filter2002
- Stationary frame generalized integrators for current control of active power filters with zero steady state error for current harmonics of concern under unbalanced and distorted operation conditions2002
- Modeling of distortion compensation ineffectivity in filters for nonactive powerIEEE Transactions on Industrial Electronics, 2001
- The effect of signal measurement and processing delay on the compensation of harmonics by PWM convertersIEEE Transactions on Industrial Electronics, 2000
- A new control strategy for voltage-type PWM rectifiers to realize zero steady-state control error in input currentIEEE Transactions on Industry Applications, 1998
- Operation of a phase locked loop system under distorted utility conditionsIEEE Transactions on Industry Applications, 1997
- A new approach to the definition of power components in three-phase systems under nonsinusoidal conditionsIEEE Transactions on Instrumentation and Measurement, 1991
- Instantaneous Reactive Power Compensators Comprising Switching Devices without Energy Storage ComponentsIEEE Transactions on Industry Applications, 1984