Optimizing the Rap Sieving Efficiency on Linear Vibrating Sieve by Using Dem Simulation
Authors:
- Jiangang YangJYJiangang Yang
- Wei ZhangWZWei Zhang
- Yuquan YaoYYYuquan Yao
- Chen SunCSChen Sun
Preprint
- 1 January 2021
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Producing the recycled hot-mix asphalt mixture (RHMA) requires an adequate stockpile of reclaimed asphalt pavement (RAP) in the project. To improve the content of RAP in RHMA and Maintain the quality stability of RHMA, the crushing and sieving technology was used to pretreat RAP, which was mentioned in the technical standards across the world. However, the obstacle that affect the RHMA output during the continuous production in the project was the low efficiency of RAP crushing and sieving. To this end, a three-dimensional three-layer linear vibrating sieve model was established in the numerical software of Discrete Element Method (DEM) by considering the sieving combination commonly used in engineering, and the Linear Model and Linear Parallel Bond Model were defined for contact properties of RAP particles. In addition, according to DEM simulation, the effects of sieving parameters such as amplitude, frequency, inclination, and length of sieve mesh were evaluated by sieving efficiency, respectively, and the optimal RAP sieving parameters were obtained and verified in the project. The results show that the sieving efficiency increases first and then decreases with the increase of amplitude, frequency, and inclination, however, the length of the sieve mesh has little effect on sieving efficiency. The order of influences of different parameters on RAP sieving efficiency was as follows: amplitude > frequency > inclination > length. The optimal sieving parameters of RAP with the highest sieving efficiency of mineral aggregate than 95% for frequency, amplitude, inclination were 20 Hz, 3 mm, and 10 °, respectively. The optimum sieve inclination of virgin aggregate was 20 °higher than that of RAP. The deviation between the sieving efficiency of the DEM simulation test and the plant sieving test was within 15 %, which means that the DEM simulation has high accuracy. In general, the results of this study could be interested in sieving machine manufacturers, the pavement maintenance sector, and construction contractors.Keywords
This publication has 19 references indexed in Scilit:
- Dynamic mesh refinement for discrete models of jet electro-hydrodynamicsJournal of Computational Science, 2016
- Employing DEM to study the impact of different parameters on the screening efficiency and mesh wearPowder Technology, 2016
- Benchmarking of process models for continuous screening based on discrete element simulationsMinerals Engineering, 2015
- Review and benchmarking of process models for batch screening based on discrete element simulationsAdvanced Powder Technology, 2015
- Modeling of Particle Flow and Sieving Behavior on a Vibrating Screen: From Discrete Particle Simulation to Process Performance PredictionIndustrial & Engineering Chemistry Research, 2013
- Testing the validity of the spherical DEM model in simulating real granular screening processesChemical Engineering Science, 2012
- DEM simulation of particle flow on a multi-deck banana screenMinerals Engineering, 2009
- A Granular motion simulation by discrete element methodJournal of Mechanical Science and Technology, 2008
- On the use of combined finite/discrete element method for impacted concrete structuresJournal de Physique IV, 2006
- Numerical methods in rock mechanicsInternational Journal of Rock Mechanics and Mining Sciences, 2002