Down-Slope Contact Transition in Railguns
Authors:
- Harold VanicekHVHarold Vanicek
- 19 December 2006
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 43 (1) , 402-407
Abstract
Most railgun experiments exhibit transition to high-voltage contact after the applied current starts to decrease from its peak value. A statistical examination of existing data revealed that such contact transitions occur at approximately 80% of peak current during down-slope. While several plausible explanations exist for the cause of such transition, we demonstrate through numerical simulation that a likely cause of this transition mechanism is a diffusion-controlled process that reduces the contact pressure below the threshold value necessary to carry the applied current. The current down-slope was found to result in a nonuniform body-force-density distribution in the armature such that the contact pressure at the armature-rail interface decreases (eventually becoming zero) even though the total electromagnetic force resulting from the applied current is still compressive. This event's diffusive nature suggests that transition can be delayed by controlling the diffusion time, either by judicious material grading or increasing the diffusion depthKeywords
This publication has 8 references indexed in Scilit:
- Thermal characteristics of a laboratory electromagnetic launcherIEEE Transactions on Magnetics, 2005
- A survey of armature transition mechanismsIEEE Transactions on Magnetics, 2003
- Magnetic blow-off in armature transitionIEEE Transactions on Magnetics, 2003
- Thermal stress in EML rail-conductor overlaysIEEE Transactions on Magnetics, 2001
- Demonstration of a hypervelocity mass-efficient integrated launch packageIEEE Transactions on Magnetics, 2001
- Electrodynamic transition in solid armature railgunsIEEE Transactions on Magnetics, 2001
- A Lagrangian formulation for mechanically, thermally coupled electromagnetic diffusive processes with moving conductorsIEEE Transactions on Magnetics, 1995
- Current melt-wave model for transitioning solid armatureJournal of Applied Physics, 1990