Interface Engineering with Polymer Interlayers: Achieving Uniform and Stable Perovskite Thick Films for X-ray Detection
- 29 April 2025
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (18) , 27545-27556
Abstract
Interface stress is a critical challenge limiting the optoelectronic performance and stability of perovskite-based X-ray detectors, often causing severe issues such as surface roughness, cracking, and film detachment during fabrication. To address this, polymer interlayers have been employed as effective stress-buffering layers at the substrate/perovskite interface. However, the influence of the polymer layer properties on the growth and quality of the perovskite films has received limited attention. In this study, we systematically explore the processability, mechanical properties, solubility, thermal stability, and adsorption strength with perovskite materials of four polymers - poly(vinylidene fluoride) (PVDF), poly(vinylpyrrolidone) (PVP), polyimide (PI), and poly(l-lactic acid) (PLLA) - using a combination of experimental and theoretical methods, emphasizing the role of polymer molecular characteristics in enhancing CsPbI2Br film quality. Among them, the CsPbI2Br thick film with a PI buffer layer demonstrates the most uniform and dense morphology, along with strong adhesion to the substrate, maintaining integrity even under a 50 g load. The resulting perovskite X-ray detectors exhibit excellent uniformity and long-term stability over 30 days of continuous operation. Moreover, the integration of the PI/CsPbI2Br thick film with a 64 × 64 thin-film transistor (TFT) enabled high-resolution X-ray imaging. This study provides valuable insights into selecting polymer interlayers to further optimize perovskite thick film-based X-ray detectors.Keywords
Funding Information
- West China Hospital, Sichuan University (ZYGX2022YGRH006, ZYGX2022YGRH010)
- University of Electronic Science and Technology of China (ZYGX2022YGRH006, ZYGX2022YGRH010)
- National Natural Science Foundation of China (52404275)
- Sichuan Province
- Research Foundation of Guangxi Key Laboratory of Superhard Material (2023-K-01)
- Fundamental Research Funds for the Central Universities, University of Electronic Science and Technology of China (ZYGX2024XJ013)
This publication has 58 references indexed in Scilit:
- High‐Resolution X‐Ray Circular Polarization Imaging Enabled by Luminescent Photopolymerized Chiral Metal‐Organic PolymersAdvanced Functional Materials, 2024
- High Thermal Conductivity of Liquid Crystal Elastomer for Stress‐Less Flexible Perovskite Solar CellsAdvanced Functional Materials, 2024
- Out‐Of‐Phase Articulation Strategy of CsPbBr3/CsPb2Br5 Perovskite for High Sensitivity X‐Ray DetectionAdvanced Functional Materials, 2024
- Composition Engineering of Perovskite Single Crystals for High‐Performance OptoelectronicsAdvanced Functional Materials, 2022
- Ceramic Wafer Scintillation Screen by Utilizing Near‐Unity Blue‐Emitting Lead‐Free Metal Halide (C8H20N)2Cu2Br4Advanced Functional Materials, 2022
- Pre‐Buried Additive for Cross‐Layer Modification in Flexible Perovskite Solar Cells with Efficiency Exceeding 22%Advanced Materials, 2022
- Seed‐Crystal‐Induced Cold Sintering Toward Metal Halide Transparent Ceramic ScintillatorsAdvanced Materials, 2022
- Full‐Dimensional Grain Boundary Stress Release for Flexible Perovskite Indoor PhotovoltaicsAdvanced Materials, 2022
- Perovskite Films with Reduced Interfacial Strains via a Molecular‐Level Flexible Interlayer for Photovoltaic ApplicationAdvanced Materials, 2020
- A Simple Way to Simultaneously Release the Interface Stress and Realize the Inner Encapsulation for Highly Efficient and Stable Perovskite Solar CellsAdvanced Functional Materials, 2019