Abstract
This brief presents an ultra-low voltage single-ended level shifter (LS) with a stacked current mirror and an improved split-controlled inverter as an output driver to enable wide-range voltage conversion. At the ultra-low input supply voltages, VDDL , the differential LS circuit will gradually be dysfunctional as the inverter produces limited voltage swings at the output. Some prior works have replaced the inverter with a pass transistor, whose gate is connected to the lower supply voltage, VDDL , to ensure the proper operation of the current mirror in its pull-up network (PUN). This requires the use of the “tie-high” standard cell to prevent gate breakdown in the pass transistor but it is unable to function properly at ultra-supply voltage. To solve this problem, we proposed to connect the pass transistor gate to the input transistor's drain. The proposed LS circuit and prior single-ended LS circuit works have been fabricated in 55 nm CMOS technology and a total of 10 chips for each circuit have been measured. The proposed LS circuit operates with a single input signal with a supply voltage of 100 mV at a frequency of 1 MHz. With a VDDL of 200 mV and VDDH of 1.2 V, the measured propagation delay is 182.1 ns and the energy per transition (EPT) is around 4.35 $\sim$ 5.44 pJ. It has achieved a 1.08 $\sim 2.25\times$ improvement in the Figure of Merit (FoM) than prior multi-supply works and a maximum improvement of 1134× compared to prior single-supply work. The FoM is based on the ratio between propagation delay and level conversion differences, which enables us to understand the circuit's ability to operate efficiently under wide signal-level conversion.
Funding Information
  • National Natural Science Foundation of China (62434006, 62350610271)