Nanosurface Mechanical Properties of Polymers Based on Continuous Stiffness Indentation
Authors:
- 28 July 2014
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 53 (9) , 1522-1532
Abstract
A systematic experimental study of the large strain surface mechanical properties of a number of polymers {polymethylmethacrylate (PMMA), polyetheretherketone (PEEK), polystyrene (PS), polycarbonate (PC), polypropylene (PP), and ultra-high molecular weight polyethylene (UHMWPE)} at the nanometer scale is described. The polymeric surfaces were indented and the data were analyzed using a contact compliance method in conjunction with a nano-indenter system. The indentation experiments were performed using a Berkovich Tip indenter with a continuous contact compliance indentation mode. The indentations were performed using a constant loading rate (300 μN/sec) to a maximum penetration depth of 5 μm. The experimental results showed a considerable strain-rate hardening effect for the polymers and a peculiarly harder response of these surfaces at the near-to-surface (submicron) layers. PMMA was the hardest polymer of the selection, whereas UHMWPE and PP were observed to be the softest polymers. The paper includes practical consideration of a creeping effect and appropriateness of tip calibration using harder surfaces for nanoindentation experimentation of polymers.Keywords
This publication has 17 references indexed in Scilit:
- Surface Plasticization of Poly(ether ether ketone)European Polymer Journal, 2011
- Nanoindentation behaviour of aluminium based hybrid composites with graphite nanofiber/alumina short fiberMaterials & Design (1980-2015), 2010
- Effect of surface roughness on nanoindentation test of thin filmsEngineering Fracture Mechanics, 2008
- Nanoindentation of wood cell walls: Continuous stiffness and hardness measurementsComposites Part A: Applied Science and Manufacturing, 2007
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Surface oxidation of a Nb(100) single crystal by scanning tunneling microscopyMaterials Characterization, 2002
- The elastoplastic response of poly(methyl methacrylate) to indentationProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1996
- Application of the compliance method to microhardness measurements of organic polymersPhilosophical Magazine A, 1996
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Hardness measurement at penetration depths as small as 20 nmPhilosophical Magazine A, 1983