Preparation of superhydrophobic and superoleophilic polylactic acid nonwoven filter for oil/Water separation
Authors:
- 7 March 2019
- journal article
- research article
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 41 (2) , 289-296
Abstract
Superhydrophobic and superoleophilic surfaces exhibit a remarkable feature in separation of oil from oily wastewaters. In this work, a green superhydrophobic/ superoleophilic polylactic acid (PLA) nonwoven filter was prepared via a non-solvent assisted phase separation method. The results showed addition of non-solvent endowed the PLA nonwoven filter with typical micro/nano hierarchical structures and high porosity. Moreover, the resultant filter exhibited excellent oil/water separation efficiency more than 95% for various kinds of oils or solvents. In addition, the filter maintained favorable recycle ability even after 20 separation cycles. Therefore, the PLA nonwoven filter showed a high separation efficiency and an excellent recyclability, which is potential in rapid separation of oil/water mixture for ocean pollution cleanup.Keywords
Funding Information
- National Key Research and Development Program of China (2018YFD0400700)
- National Natural Science Foundation of China (U1604128, 61704155)
- China Postdoctoral Science Foundation (2016M600583, 2017M622369)
This publication has 41 references indexed in Scilit:
- Preparation and morphology control of three‐dimensional interconnected microporous PDMS for oil sorptionPolymers for Advanced Technologies, 2015
- Magnetic, Durable, and Superhydrophobic Polyurethane@Fe3O4@SiO2@Fluoropolymer Sponges for Selective Oil Absorption and Oil/Water SeparationACS Applied Materials & Interfaces, 2015
- Superhydrophobic nanocoatings: from materials to fabrications and to applicationsNanoscale, 2015
- Pumping through Porous Hydrophobic/Oleophilic Materials: An Alternative Technology for Oil Spill RemediationAngewandte Chemie International Edition, 2014
- A facile two-step approach to prepare superhydrophobic surfaces on copper substratesJournal of Materials Chemistry A, 2014
- Morphology and performance control of PLLA-based porous membranes by phase separationPolymer, 2013
- Grafting polymerization of polylactic acid on the surface of nano‐SiO2 and properties of PLA/PLA‐grafted‐SiO2 nanocompositesJournal of Applied Polymer Science, 2013
- A hierarchical mesh film with superhydrophobic and superoleophilic properties for oil and water separationJournal of Chemical Technology & Biotechnology, 2011
- An overview of the recent developments in polylactide (PLA) researchBioresource Technology, 2010
- Porous poly(l-lactide) films obtained by immersion precipitation process: morphology, phase separation and culture of VERO cellsPolymer, 1999