The Effect of Carbon and Silicon Variation on the Microstructure and Mechanical Properties of a Cobalt-Based Superalloy
Authors:
Open Access
- 28 January 2026
- journal article
- research article
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 57 (3) , 1178-1199
Abstract
The performance of cast Co-based superalloys is strongly influenced by the nature, stability, and distribution of carbide phases, which depend on C and Si content. This study examines the effect of C (0.25, 0.5 wt pct) and Si (1, 4 wt pct) on the microstructure and tensile behavior of a cast Co-based superalloy. As-cast microstructures were dominated by M 23 C 6 in low-Si alloys and M 12 C in high-Si alloys, with χ phase formed in the low-C, high-Si alloy. Thermal exposures at 800 °C and 1000 °C (100 h) promoted carbide transformation and intragranular precipitation, whereas 1200 °C (50 h) accelerated transformation and coarsening. At room temperature, high-Si contents increased yield strength but significantly reduced ductility, with crack susceptibility increasing from M 12 C to M 23 C 6 to χ . Embrittlement was exacerbated after 800 °C aging due to needle-like intragranular σ and M 12 C precipitation in high-Si alloys. Furthermore, 1000 °C tensile testing of as-cast alloys revealed a performance inversion: the M 23 C 6 -reinforced low-Si alloy achieved superior strength (UTS ~ 196 MPa) compared to high-Si variants. These findings establish mechanistic links between chemistry, carbide evolution, and tensile response, underscoring the need to limit Si and balancing C to optimize ductility and strength in Co-based superalloys.Keywords
This publication has 33 references indexed in Scilit:
- Surveying the Effects of Aging a High C-Containing Co-Based Superalloy From the As-Cast and Solution Heat-Treated ConditionsMetallurgical and Materials Transactions A, 2024
- Oxidation Behavior and Structure Stability at 1250 °C of Chromium-Rich TaC-Containing Cast Alloys Based on Nickel and CobaltMetallurgical and Materials Transactions A, 2020
- Gamma Prime Precipitate Evolution During Aging of a Model Nickel-Based SuperalloyMetallurgical and Materials Transactions A, 2017
- Formation of the χ-Phase Precipitate in Co-28Cr-6Mo Alloys with Additional Si and CMetallurgical and Materials Transactions A, 2015
- Precipitates in Biomedical Co-Cr AlloysJOM, 2013
- π-Phase and χ-Phase: New Precipitates in Biomedical Co–Cr–Mo Alloys2012
- Carbide Formation and Dissolution in Biomedical Co-Cr-Mo Alloys with Different Carbon Contents during Solution TreatmentMetallurgical and Materials Transactions A, 2010
- Phase characterization in as-cast F-75 Co–Cr–Mo–C alloyJournal of Materials Science, 2010
- Electrochemical Study of Cobalt‐Base Superalloy Corrosion by a Molten Glass: Influence of Alloy Microstructure and Chemical Composition of the Glass2006
- Mechanical Properties of Diverse Binary High-Temperature Intermetallic CompoundsMetallurgical Transactions A, 1990