The steady propagation of an air finger into a rectangular tube
Authors:
- 16 October 2008
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 614, 173-195
Abstract
The steady propagation of an air finger into a fluid-filled tube of uniform rectangular cross-section is investigated. This paper is primarily focused on the influence of the aspect ratio, α, on the flow properties, but the effects of a transverse gravitational field are also considered. The three-dimensional interfacial problem is solved numerically using the object-oriented multi-physics finite-element library oomph-lib and the results agree with our previous experimental results (de Lózar et al. Phys. Rev. Lett. vol. 99, 2007, article 234501) to within the ±1% experimental error.At a fixed capillary number Ca (ratio of viscous to surface-tension forces) the pressure drops across the finger tip and relative finger widths decrease with increasing α. The dependence of the wet fraction m (the relative quantity of liquid that remains on the tube walls after the propagation of the finger) is more complicated: m decreases with increasing α for low Ca but it increases with α at high Ca. Our results also indicate that the system is approximately quasi-two-dimensional for α ≥ 8, when we obtain quantitative agreement with McLean & Saffman's two-dimensional model for the relative finger width as a function of the governing parameter 1/B = 12α2Ca. The action of gravity causes an increase in the pressure drops, finger widths and wet fractions at fixed capillary number. In particular, when the Bond number (ratio of gravitational to surface-tension forces) is greater than one the finger lifts off the bottom wall of the tube leading to dramatic increases in the finger width and wet fraction at a given Ca.For α ≥ 3 a previously unobserved flow regime has been identified in which a small recirculation flow is situated in front of the finger tip, shielding it from any contaminants in the flow. In addition, for α ≳ 2 the capillary number, Cac, above which global recirculation flows disappear has been observed to follow the simple empirical law: Cac2/3α = 1.21.Keywords
This publication has 29 references indexed in Scilit:
- Scaling Properties of Coating Flows in Rectangular ChannelsPhysical Review Letters, 2007
- Sedimentation of a two-dimensional drop towards a rigid horizontal planeJournal of Fluid Mechanics, 2006
- On the motion of bubbles in vertical tubes of arbitrary cross-sections: some complements to the Dumitrescu–Taylor problemJournal of Fluid Mechanics, 2004
- Fluctuations in viscous fingeringPhysical Review E, 2002
- The axisymmetric and plane cases of a gas phase steadily displacing a Newtonian liquid—A simultaneous solution of the governing equationsPhysics of Fluids, 1997
- The motion of long bubbles in polygonal capillaries. Part 2. Drag, fluid pressure and fluid flowJournal of Fluid Mechanics, 1995
- Transport of gas bubbles in capillariesPhysics of Fluids A: Fluid Dynamics, 1989
- Film draining and the Saffman-Taylor problemPhysical Review A, 1986
- The Penetration of a Finger into a Viscous Fluid in a Channel and TubeSIAM Journal on Scientific and Statistical Computing, 1985
- A method for incorporating free boundaries with surface tension in finite element fluid‐flow simulatorsInternational Journal for Numerical Methods in Engineering, 1980