Thin shell aerogel fabrication for FIREX-I targets using high viscosity (phloroglucinol carboxylic acid)/formaldehyde solution
Authors:
- 22 July 2008
- journal article
- Published by Cambridge University Press (CUP) in Laser and Particle Beams
- Vol. 26 (3) , 449-453
Abstract
Capsules with a thin aerogel shell were prepared by the OO/W/OI emulsion process. (Phloroglucinol carboxylic acid)/formaldehyde (PF) was used as the water phase (W) solution to form the shell of the capsule. PF is a linear polymer prepared from phloroglucinol carboxylic acid. The viscosity of the PF solution can reach a high level of 9×10−5 m2/s without gelation while resorcinol/formaldehyde (RF) gelates at ~3–4×10−5 m2/s. Using the viscous PF solution, capsule with a 17 µm gel shell was fabricated. This thickness satisfies the specification of the first phase of Fast Ignition Realization Experiment (FIREX-I) at Osaka University. When PF gel was extracted to remove the organic solvent, shrinkage of 9% occurred. The final density of the PF aerogel was 145 mg/cm3. Both the shell thickness and density can satisfy the specification of FIREX-I. The pore size of the PF aerogel was less than 100 nm while that of RF was 200–500 nm. The SEM showed that PF had particle-like foam structure while RF had fibrous-like foam structure.Keywords
This publication has 35 references indexed in Scilit:
- Status of the development of ignition capsules in the U.S. effort to achieve thermonuclear ignition on the national ignition facilityLaser and Particle Beams, 2006
- Experience of micro-heterogeneous target fabrication to study energy transport in plasma near critical densityLaser and Particle Beams, 2006
- Generation and transport of fast electrons inside cone targets irradiated by intense laser pulsesLaser and Particle Beams, 2006
- Low-Density-Plastic-Foam Capsule of Resorcinol/Formalin and (Phloroglucinolcarboxylic Acid)/Formalin Resins for Fast-Ignition Realization Experiment (FIREX) in Laser Fusion ResearchJapanese Journal of Applied Physics, 2006
- Resorcinol‐Formalin Foam Balls Via Gelation of Emulsion Using Phase‐Transfer CatalystsMacromolecular Chemistry and Physics, 2005
- Foam materials for cryogenic targets of fast ignition realization experiment (FIREX)Nuclear Fusion, 2005
- Laser-ablation treatment of short-pulse laser targets: Toward an experimental program on energetic-ion interactions with dense plasmasLaser and Particle Beams, 2005
- Progress and perspectives of fast ignitionPlasma Physics and Controlled Fusion, 2004
- High-density compression experiments at ILE, OsakaLaser and Particle Beams, 1991
- Organic aerogels from the polycondensation of resorcinol with formaldehydeJournal of Materials Science, 1989