Improving the Concrete Compressive and Flexural Strength with a Low Fraction Addition of Carboxylated Nitro-oxidized Cellulose Nanofibrils from Banana Rachis
Authors:
- Mushi Ngesa EzekielMEMushi Ngesa Ezekiel
- Kagya EmmanuelKEKagya Emmanuel
Open Access
- 17 September 2024
- journal article
- Published by Heighten Science Publications Corporation in Annals of Civil and Environmental Engineering
- Vol. 8 (1) , 087-095
Abstract
Conventionally, concrete strength depends on the bonding interface, especially in hydrated products such as calcium silicate hydrate (CSH). As a result, concrete is sensitive under tensile load. With its unique properties, a low fraction of carboxylated nitro-oxidized cellulose nanofibrils (NOCNF) from the banana rachis is employed to improve the mechanical performance of the concrete nano structurally. Compressive and flexural strength using the NOCNF content at 0, 0.05, and 0.1 wt. % cured in 7 and 28 days were evaluated. Notably, the compressive strength increased by 16% and flexural strength by 13% at 0.1% NOCNF compared to plain concrete after the 28 curing days. A low NOCNF fraction achieved a good, albeit impossible, performance with the microscale fibers. The nanostructured effect was discussed twofold: an excellent interaction between the NOCNF and the hydrated products and the carboxylic groups on the NOCNF surface enhanced the cement hydration. These data are better than the literature based on the small-diameter cellulose nanofibrils without the carboxyl groups. As a sustainable nanocomponent, NOCNF could be a perfect candidate to improve concrete performance under mechanical load.Keywords
This publication has 31 references indexed in Scilit:
- Strong nanostructured film and effective lead (II) removal by nitro-oxidized cellulose nanofibrils from banana rachisCellulose, 2024
- Nitro-oxidation process for fabrication of efficient bioadsorbent from lignocellulosic biomass by combined liquid-gas phase treatmentCarbohydrate Polymer Technologies and Applications, 2022
- Pozzolanas and Pozzolanic Materials2019
- Mechanical characteristics of tri-layer eco-friendly polymer composites for interior parts of aerospace application2018
- The influence of cellulose nanocrystal additions on the performance of cement pasteCement and Concrete Composites, 2015
- Properties of nanofibre reinforced cement compositesConstruction and Building Materials, 2014
- Quantitative analysis of C–S–H in hydrating alite pastes by in-situ XRDCement and Concrete Research, 2013
- Cellulose microfibrils from banana rachis: Effect of alkaline treatments on structural and morphological featuresCarbohydrate Polymers, 2009
- The effect of paste volume and of water content on the strength and water absorption of concreteCement and Concrete Composites, 2005
- Design and mechanical properties of insect cuticleArthropod Structure & Development, 2004